answersLogoWhite

0


Best Answer
Possible Solution...Need Help Also...I managed to purchase a 4WD locknut socket at Autozone this past Saturday near Houston, TX. My receipt shows a #552265 33625072. I am not sure which number is the SKU #. The tool is basically a large socket for 1/2" drive with 4 prongs on the bottom. Since the tool is slightly large I was able to engage only one prong at a time. I would have liked a tool that fit better, but under the circumstances I was happy just to get the job done. With a 1/2" drive 36" breaker I had enough leverage & was pleased with the way the socket performed, even thought the tool did not fit my car exactly. My wife's '96 pathfinder has about 163,000 miles & was making considerable noise due to bearing wear. I managed to purchase a set of Federal Mogul bearings & a set of brass punches from my local O'Reily store. If you find a better tool please let me know also. Thanks, Justin (jwong.net)
User Avatar

Wiki User

โˆ™ 2011-10-20 17:23:21
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: 1996 pathfinder you are changing the front rotors you can't get the locknut off the haynes manual says you need a pin spanner or special socket anyone know where you can get either Can not find?
Write your answer...
Submit
Related questions

How do you remove fan clutch on 2000 Dakota with v6?

You need two special tools, a 36mm wrench and a spanner/holder devise. You hold the pulley with the spanner and turn the fan clutch counter clockwise to remove.


How may cams does a 97 pathfinder have?

The base model pathfinder comes with a single camshaft. There is an upgraded vq33e that comes with twin cams found in the 97 and up SE (special edition) model.


Special Term for changing a law?

Amending


How do you remove the fan on a Ford Falcon ed?

you will need a spanner to fit the hub behind fan, special tool , 32 or 36 mm from memory, or you can grind one down. Then hit spanner with hammer to loosen ; remember it is left hand thread !


Do you need special tools for Brake rotor replacement on a 1990 f250 4X4?

Should be "peel off" rotors if not you will need a spanner socket only


How do you break loose the fan nut on a 1993 Jeep Grand Cherokee?

With two special tools, a slim 36mm wrench and a spanner to hold the pulley.


What special tools are needed for removal of water pump on dodge 2001 truck?

Just a 36mm wrench and a holding devise (spanner) to remove the fan clutch.


What tools are needed for changing the rotors on a 2002 WS6?

No special tools are needed!


How do you replace a clutch fan on a 2004 dodge ram 1500 Do I need any special wrenches to be able to do this?

It requires a 36mm wrench and a spanner/holding device. The fan clutch unscrews counter clockwise.


What is special about a bell frog?

Bell frogs have a croak that sounds like a motor cycle changing gears.


Changing oil cooler lines on a 2001 1500HD?

Changing the oil cooler line assembly on a 2001 1500HD Silverado, how long should this job take and what if any special tools are needed?


Changing back brake pad how do you get the piston back in?

It is threaded-They make a special tool (NOT EXPENSIVE) available at Sears


Is there a special tool required for changing a water pump on a 1995 Chrysler Cirrus?

Yes, a couple of tools are required.


Is there anything special to do when changing the rear brakes on a 04 Dakota truck?

dont over tighten shoes to drum


Change license plate light on a Nissan Pathfinder?

you have to remove the inside hatchback gate cover to get to the bulbs. Take care because you need a special tool to remove the clips so the won't snap


Is there a special trick or tool to changing a fuel filter on a 1998 Mazda B2500 2.5 4-cylinder?

There is a special tool you need. Available at most auto supply stores.


How do you remove the crankshaft pulley from a 2005 Chrysler PT Cruiser?

You use an impact wrench or breaker bar and spanner to remove the bolt.. a special insert is placed were the bolt was. Then a three jaw puller is used to pull the pulley off.


Is there anything special about changing front disk brake pads on a 2003 Honda Accord LX 4-cylinder?

No


Does changing a front wheel bearing on a 2004 Chevy Silverado 1500 require a special tool?

yes,it requires two special sockets for the inner and outer wheel nuts inside the hub


How does Boeing deliver its planes?

Like an airfix kit. The buyer then assembles it at whichever airport it is based in. They also send a special "Boeing" spanner which is not standard size and all the nuts, bolts and glue you will need for the build. Like IKEA for planes.


Replacing rear brake shoes 1998 pathfinder?

there is nothing special about the rear brakes, if you have changed any kind of rear brakes on anything else, you will be able to handle the job. if not, spend the $20 and buy yourself a manual.....


Is there a special tool to undo the screw that holds the battery in place to the floor in the boot on the Z3 I just cannot reach it with a normal spanner?

Sounds like you just need a socket wrench, with a long enough extension and the proper size metric socket.


How are squid eggs fertilized?

Males attract the females by displaying changing chromatophors (their colour spots) and then fertilizes the female with a special arm. The females receive the sperm from the male with a special pad underneath their sharp beak.


Is there a special procedure to changing brake pads on a 97 Chevy camaro?

no different then changing the brakes on any other car all u need is some c clamps and what ever u would normally use elsewhere


Can you import data from the web to excel?

There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.There are lots of ways of doing it and some websites give you special ways to do it so as to keep dynamic data up to date, such as changing share prices. It really depends on what it is you are trying to import and where it is coming from.