You'll need to pull the engine, which means you'll need an engine lift. Beyond that, you probably have enough tools. Make sure you replace the clutch plate, pressure plate and throwout bearing and make sure you have the flywheel resurfaced. While the engine is out, replace the rear main seal if you can get to it.
To remove the clutch the vehicle would need suspending to access better. After it as been lifted the motor mount and clutch can be removed. Replace and return parts.
vehicle wise, a clutch is to help you change gears and the accelerator is to accelerate the vehicle in the preferred direction (forwards/ Backwards). in a car the clutch is normally the foot pedal on the left and the accelerator is on the right. Both of the pedals are on either side of the break.
Depends on the type of vehicle you are working on. With an older VW bug the engine must be pulled to change the clutch. On most cars and trucks the technique is to pull the transmission.
I would need to have more information on the vehicle as to the year, make and model.......
It is a fairly big job. It requires accessing the clutch by removing the transfer case from the vehicle after separating it from the engine.
The purpose of a clutch on a vehicle is to disconnect the drive of the engine from the gearbox (this would be required when the vehicle is stationary or to change gear). While the engine is running the crankshaft is continually turning, It is the crankshaft that turns the gearbox and via the gearbox the road wheels. Obviously there are times when the engine is running but drive is not required, The clutch is the mechanism by which this is achieved.
Hi, The engine and transmission assembly must be removed from the vehicle to replace the clutch on a RAV4 AWD. It's a 10+ hour job. Good luck.
You might want to maybe change or refill you transmission fluid in your vehicle. Also, you might have been "riding your clutch" in this case it needs to be changed.
The short story: remove shift linkage. Remove axles. Remove transmission (engine stays in car). replace clutch. You must have a manual to do this job, or it will not work. Even mechanics who do this job will work from a book.
NO FREE PLAY AT TOP POSITION - CLUTCH SLIPS AND VEHICLE DOES NOT MOVE TOO MUCH FREE PLAY AT BOTTOM - VEHICLE WON'T SHIFT CLUTCH DOES NOT RELEASE
clutch change method Nissan Almera
Unless someone has done a custom hydraulic clutch setup on this vehicle- there is no clutch fluid. It is a cable clutch linkage on a stock vehicle. If it has been customized there will be a easily identifiable reservoir connected to the clutch pedal or connected to the clutch master cylinder by a hose.