if the clock is not displaying that is light bulb you can buy on eBay or at a gm dealer.
Blown fuse. Your brake lights don't work either.
The constant power line from you radio is shorting out on your radio harness the same thing happened to me the other day
The instrument cluster lights have their own fuse. It's a 5 amp at the bottom center of the fuse block. When the lights are on, the radio draws lamp power from the instrument cluster. This allows you to dim the brightness of the radio display with the other internal lamps.
15A fuse - does both.
if you are referring to the stock radio... i think you have to take off the front part of the radio... if its possible at all to replace them ==Another answer== I just pulled the front off a spare stock Delco radio from my '96 (a few plastic clips around the perimeter let it come out) There is one obvious bulb behind what would be the station/time display. Getting to it is a mystery as it's behind a plastic shield that appears to be fastened to the PC board. The lights behind the pre-set buttons are not obvious because there is a PC board right behind the front panel of the radio. If I recall correctly, I replaced this radio because A. the station/clock display didn't work, and B. because either the pre-set buttons didn't light up, or maybe just because the plastic coating over them was damaged. I found a used perfectly working replacement on Ebay for about $30.
I owe a 2001 doged caravan sport my radio is not working properly after changed the altarnator
Cant you have to replace the entire radio
How do I Replace light in 2000 grand prix radio?" This space is for answering "http://wiki.answers.com/Q/How_do_I_Replace_light_in_2000_grand_prix_radio"
THE LIGHTS ON THE RADIO ON THE LEFT SIDE ARE NOT LUMINATED. WHAT DO I NEED TO DO TO FIX THIS PROBLEM?
If the radio in a 1996 Dodge Grand Caravan quits working, it is likely a blown fuse. It could also be faulty wiring or a defective radio.
yes
You have to replace the whole button.
replace the radio fuse with the motor running, it'll reset the unit.
Check the radio/Acc fuse...
You have three options: -- Repair it. -- Replace it. -- Forget it.
Your radio operates on one fuse, so if your display wasn't working, but the radio still worked, your radio is fried. Replace it.
sounds like you have overloaded and blown a fuse or relay check fuses . disconnect power source for radio recheck fuses.if dash lights come on, find a different point for power supply for radio. actually you should connect radio to accesories .lights dont take as much power as radio