Remove the spindle and then bring it to a shop to have it pressed out. Then have the new one pressed in. replace the spindle back in the car with the new hub
90psi
Yes, there is a diagram of the rear brake shoes of the 1999 Saturn SC1. It is found in the cars maintenance or repair manual.
The voltage regulator is in the alternator on that model vehicle
You can find your 1999 Ford Expedition front windshield wiper fuse in the fuse box. The windshield wiper fuse will be in the second column, fourth from the top.
in the engine area directly in front of the steering wheel
The 1999 Saturn main bearing cap torque specifications are 160 pounds per square inch. The main bearing cap bolts should be torqued in 40 pound intervals.
The front axle torque specs of a 1999 Saturn is 41 ft lbs. It is the axle shaft support bracket to engine bolts.?æ
The front spindle must be removed as the bearing is pressed in. Not a job for a beginner, but if you have some auto expertise, not too difficult...
36mm
On a 1999 Saturn vehicle, the backup light switch is located on top of the shift housing, which is situated on the top of the transmission. This switch requires a 7/8' wrench for removal.
If a 1999 Infiniti G20 is shaking on the right front side it could be a bad wheel bearing. The rotor on that side may need to be replaced if the wheel bearing is not the problem.
$185.00 parts and labor front left side
the library should have a shop manual for this vehicle :)
Passenger side front center below dash board.
A 1999 Kia front hub removal picture at most auto-parts stores. Most auto-parts stores will supply you with instructions, pictures, and diagrams when you purchase the parts.
Sounds like you have a bad drive shaft.
Remove the inner door panel.See link below.