0
http://www.focushacks.com/index.php?modid=75 The link above will give an indication on how to proceed. However, be aware that the 15mm nut on the automatic belt tensionner must be turned counterclockwise to release the tension on the belt. Not much torque needed when correctly performed. When working from above the belt should be monted on all flywheels except the idler pulley. Whilst turning the belt tensioner (counterclockwise) push the belt down under the idler pulley and release the torque on the tensionner nut to complete the installation.
Wiki User
∙ 16y ago
Wiki User
∙ 11y agoDefinitely NOT a job for the amateur. Very tricky and you really have to get the manual to learn how to do it. (personally, I wouldn't own ANY vehicle without getting the manual for it anyway)
Add your answer:
Earn +20 pts
How do you change out ac belt for 2001 Tahoe?
The ac belt has a tensioner that is accessed from below, and takes a tensioner tool to loosen. Remove the serpentine belt, release tension on the ac belt then the belt can come off for replacement.
How do you route a serpentine belt on a 1999 dodge stratus to bypass the air conditioner compressor?
The serpentine should route the same as with the AC except fro the AC compressor. The belt will go straight past the compressor, so you will need a shorter belt to make the bypass work.
How do you install a Serpentine belt on a 2001 Chrysler LHS?
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
How do you install an alternator on a 2003 Dodge Stratus?
The 2003 Dodge Stratus came optionally equipped in a 3.0L V6 engine. The first step is the disconnection of battery cables. Second, the serpentine drive belt can released and removed. Last, the two bolts holding the alternator to engine mount can be removed and replacement. The OE alternator for the 3.0L application is AC Delco #3341420.
What is the serpentine belt routing for a 2004 dodge ram 3500 5.9L cummins turbo diesel with ac?
http://www.thedieselgarage.com/forums/showthread.php?t=52035
How much does a serpentine belt replacement cost on a 2000 Dodge Caravan cost?
Not sure ,but it costs $115 to change mine on my 1998 Dodge Durango.
Can you tighten the serpentine belt on a 2000 dodge caravan?
You can do that by replacing the tensioner
Serpentine belt routing diagram 2000 dodge caravan?
Here it is:
How can I install a serpentine belt for a 1996 dodge caravan 3.3?
by taking it to a mechanic
Will the serpentine belt from a 2000 dodge caravan fit into a 2002 Chevy Malibu?
no!
How do you adjust serpentine belt tensioner to install a new belt on a 1988 dodge caravan?
The belt tensioner is self-adjusting.
Where can you find a diagram for the serpentine belt on a Dodge Caravan?
Go to www.autozone.com and look under specifications, belt routing. On a 1989 Dodge Grand Caravan, the diagram is on the side of the engine where the S-belt is located.
How do you change a serpentine belt on a 1991 dodge caravan 2.5?
There should be a diagram under the hood for that year.
98 dodge grand caravan serpentine belt keeps falling off what do you need to do to fix it?
Fit a new belt tensioner
Is a timing belt and serpentine belt the same on a 1997 Dodge Caravan?
No. The timing belt or chain connects to crankshaft and camshafts. The serpentine belt connects the crankshaft with the alternator, ac compressor, power steering, etc.
Where is the water pump located on a 99 dodge caravan 3.3?
It is the item in the serpentine belt that is the lowest and furthest forward.
How do you remove the tension from the serpentine belt of a 1998 Dodge Grand Caravan?
The belt tensioner is rotated clock wise with a 15 mm wrench or belt tool.
