answersLogoWhite
Cars & Vehicles
Pontiac Grand Am
Visible Light Spectrum
Light Bulbs and Artificial Lighting

2002 Ford Taurus instrument panel lights do not light and bulbs are all good What could be the cause?

151617

Top Answer
User Avatar
Wiki User
Answered
2007-10-14 17:49:36
2007-10-14 17:49:36

This may be of use have you checked tht the wiring and fuses are in sound condition

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Replace the light bulbs that are burned out, usually from the back side of the instrument cluster.


cause the bulbs are burned out? cause the fuse is blown? jeez....


If the parking/tailight fuse is good - then it may be a bad headlight switch No tail lights but the bulbs are working? Please explain.



If the back lights on a Peugeot 206 are not working, make sure the bulbs are new. If the bulbs are not the problem, there could be an issue with the fuse.


Doesn't need a lot of moisture inside a headlight to blow bulbs especially halogen type.


There are 2 filiments in those bulbs. One for tails/turn and the other for brake lights. Try replacing one bulb first. I think there are two offest tits on the shaft of those bulbs. Be sure you insert it correctly into the socket. For that matter check to see if they are in correctly now.


Bad bulbs can be the cause of your reverse lights not working on your 1999 Toyota Tacoma. A problem with the reverse switch or bad wires can also be the cause of your reverse lights not working.



check your fuse, relay, switch and mabe bulbs


A blown bulb. Check fuses and then start replacing the bulbs one by one.


check the bulbs themselves they sometimes short out internaly & cause feedback also check sidemarker lights I have changed all bulbs and fuses! Wiring problem???


Probably the wrong bulbs or the brake lights are getting stuck "on". Or maybe a combination of the two. Check that you have the right bulbs and check to make sure something isn't keeping the brake lights on. FriPilot




Check the bulbs, then the fuse, then the switch at the pedal.


Answer 1 - Instrument Lights Operate IntermittentlyWithout doing a "hands on troubleshooting" of your vehicle, no one here can be certain of the specific location and cause of your problem. However, based on your question, I suspect that the cause is a loose connection in the circuit providing power to the instrument lights, or on the instrument panel circuit board itself.It is possible also, that the instrument panel dimmer switch is wearing out.Answer 2 -The dash dimmer switch or the headlight switch is the most likely problem.


Most likely cause would be a blown fuse.


Check the bulbs - they are doubloe filamented with the smaller being for brake/turn signals Check the fuses


A blown fuse would cause the hazard lights not to work on the 1994 Ford F150. It could also be blown bulbs causing the lights not to work.



They are either the wrong bulbs or one of the filaments is burned out. The bulbs should have two filaments. One is illuminated when the lights are on. The other is brighter when the brakes are used.



Check the bulbs, fuse & brake light switch on the pedal.




Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.