It is a wiring problem. My mechanic followed the wiring and found where it had frayed. He spliced the wire, removed the headlight and soldered it back on. Works like new now!
If you look closely to your bulb. Their is two wires in side. Only one comes on when switch is turned to low beams. Then switched to high beams both wires light up.
To determine the cause of a 'service' light activating, you need to have someone with the appropriate equipment connect to the car's computer to read the code for a particular problem.
► Because it remains rigid. there is only one way to connect 3 lines into a triangle (think about beams and connectors). the structural strength comes from the beams and the connectors. the strength of the connectors is needed to keep the beams together, but the real strength comes from the beams. as long as they don't stretch/shrink, the triangle will be stable. for a rectangle, the same beams/connectors could be used for a parallelogram. all of the structural strength would have to be in the connectors. if the beams are allowed to pivot at the corners, you will loose the structure
Your computer brain in your truck is messing up take it to a mechanic is my advice. Not sure I even understand what you are asking,but, If its what I think , its just a matter of turning on your lights. For some reason Chevy thought it would be a good idea to have just your low beams and the high beam dash light come on automatically when it got dark, don't ask me why. If this is not it rephrase you question and be more presice.
through an electron gun beams of cathode and anode comes out.
yes it comes stock
Wood (timber) comes from trees that are felled and sawn into planks or thick beams.
If the service light comes on it usually mean there is maintenance needed to be done elsewhere than the engine. Try making sure all your lights work including break lights, turn signals head lights, parking lights, etc.
The right side
Turn The Gas Caps Until It Comes Off?
Check for a bad or loose ground
The shifter knob on a 1995 Chevy Cavalier is thread on. To remove it just spin the knob counter clockwise until it comes off.
Steel is inherently more flame resistant.
Yes!
It comes out the back of the light housing.
The american service is not that much good when it comes to desserts.
No...it comes as an assembly. Go to ebay, type in 2002 cavalier tail light.You can see one there. The difference is the reflection pattern when you push the brake.
Buy a kit at Wal-Mart or auto parts comes with instructions
36 months or 36000 miles, whichever comes first.
it comes on when you need gas
It is in the condenser at the connection to the liquid line. This is the line that comes up from the bottom of the condenser.
No, you should dim your high beams the minute the oncoming vehicle comes into view. Even at some distance high beams can be dazzling to oncoming traffic - ESPECIALLY on extremely dark roads.
They are both generic corporate doublespeak. However, service usually comes before someone has a problem with you, relations comes after.
Because your vehicle needs a certain service. That service will be listed in your owner's manual.
I recently porchased an 04 cavalier with the 2.2 ecotec engine. It gives me around 360 miles on a full tank but thats really pushing it