The suction port is on top of the suction accumulator, access it from the passenger side wheel well at the front. Need to take off the two lower screws from the inner fender liner, then you will see it. helps to have a hoist or put it up on jack stands.
Warren
I assume you are referring to a vacuum line. As there are more than one vacuum hoses, impossible to answer your question.
The suction line is the big one. This line should be cold when the unit is on. The small line is the liquid line.
The suction line will be the larger line going into the compressor.
A suction line is usually cold to the touch.
No, the liquid (discharge) line is the high pressure side. The suction line is the low pressure side.
The larger line is suction. The larger line is the suction side which should be on the right side of the compressor......
The focus of an earthquake is the location within the lithosphere where seismic energy is released when slippage first occurs along a fault line. The epicenter is the location on Earth's surface directly above the focus.
The focus of an earthquake is the location within the lithosphere where seismic energy is released when slippage first occurs along a fault line. The epicenter is the location on Earth's surface directly above the focus.
It is common practice to specify the pump suction line one size larger than the pump discharge line in order to increase the Net Positive Suction Head available (NPSHA) to the pump. A smaller suction line the same pipe size as the discharge line would result in more pressure drop in the suction line and reduce the amount of head available to the suction side of the pump. This in turn would result in an operating point closer to cavitation of the pump.
"What" on the suction line of an air conditioner indicates a problem?
The low side service port is located on the suction line at the top of the engine.....
It depends if it has suction cups on its shoes or not