Can't be answered without knowing who made it and the serial number. don't refinish it.
Yes, it can. I would sand it with a 220 or even 360 grit.
Because if it has been refinished, part of it's "antiqueness" (the original finish) has been sanded away and replaced. Most people would look at this as giving the piece a new lease on life - making it much more serviceable and attractive. But not an antique collector. They would view it as "ruining" the piece.
The machete was a normal machete, but was customized with a chrome plated blade. In the directors cut of the movie, a common machete was purchased, sanded down, and refinished for the movie.
Top Grain leather is considered as the second highest grade of leather, and is as strong and durable as full grain leather. It is split from the top layer of hide and sanded and refinished. Genuine leather is made from the remaining layers after the top layer has been removed. It has a suede surface that is refinished to appear of a higher grade.
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
form_title= Floor Sanding form_header= Sand your floors for a smooth floor. How much area needs to be sanded?*= _ [50] Have you ever had your floors sanded?*= () Yes () No When would you like the floors sanded?*= _ [50]
I recently bought a long rifle in fair to good condition -about 60% of bluing, good stock (sanded heavily), bent bolt- for $200.00.
Laminate floors are manufactured, a thin layer of wood or Formica is glued to a backer. The surface is only about 1/16th of an inch thick and the whole board is about 3/8 inch thick. Hardwood floors are all wood and 5/8 to 3/4 inch thick. Oak is the most common but there are many different types of wood available. They can be sanded and refinished several times over a long period of time. Laminate can not be sanded and had a hard factory coating that resists staining more than hardwood.
Unsanded wood will have a "rougher" feel to it. The sanded wood should feel rather smooth.
it is icy and then sanded
Make sure every single piece of mud is well sanded and no seams are visible.
If your hardwood floor is not shining, it might need some polish. Or, it might just be old. I suggest investing in a new hardwood floor if yours is so ancient that it has lost its ability to be lucent. Or you can have your floors refinished. If they have been sanded recently, you might have a satin sheen in the polyurethane that was applied. If this is the case, all you have to do is re coat it with a semi gloss or gloss polyurethane.