0
Go to autozone.com, select your make/model and they offer online service manuals. In there, you will find diagrams for serpentine belt routing.
Wiki User
∙ 15y ago
Anonymous
Add your answer:
Earn +20 pts
Where can you find routing diagram for serpentine belt for jeep 6 cylinder 4.0 with AC?
I had a `93 Cherokee and it was right under the hood.
Do you have a diagram showing the installation of a serpentine belt for a 93 Dodge Caravan?
Go to www.autozone.com Click on repair info, specifications, belt routing, then input your vehicle information. Once it loads up click on view diagram.
Trying to find the routing for serpentine belt for a 93 Dodge Spirit with a 3.0L V6?
Auto zone has a repair guide on their website which shows the diagram
How much to replace serpentine belt on 2002 Saab 93?
Saab dealer quoted 1 hour to replace the serpentine belt. The cost of the belt was $60 canadian.
How do you replace the serpentine belt on 93 aerostar 4.0?
You should have a diagram to the left of the hood latch. In the diagram, it should show the tension pulley that needs to relieved. Tools: long ratchet wrench and socket. It's fairly easy to do.
What is the belt on the underside of the engine beside the serpentine belt on a 93 Tempo GL V6 Model?
It's the belt for the water pump.
How do you tighten alternator belt on a 93 Plymouth acclaim?
The 93 Acclaim has a serpentine belt. The tensioner below the alternator is what keeps the tension. If you have not tension I would replace the belt first and then check the tensioner.
Where can you find a diagram for the serpentine belt on a 93 dodge spirit with a 30 liter engine?
Typically, one would draw a diagram before dissassembling. Usually there is a sticker under the hood that shows it. A parts store or dealer may assist you otherwise.
How do you install a serpentine belt in a 93 Lincoln town car?
You need a 1/2" breaker bar or ratchet handle, place in the appropriate slot in the belt tensioner, and pull or push to release the tension. The diagram is under the hood for proper replacement.
How do you put on a water pump belt on a 93 4-cylinder Cavalier?
Your water pump should run off of the serpentine belt. there shouldn't be a separate belt for the 4 cylinder. if you change the serpentine belt, there is a belt tentioner in the middle. using a wrench, not a ratchet(the ratchet will not have enough room to fully turn the tentioner), turn all the way to the right, remove the worn belt and replace it with a new one, following the belt diagram on the inside of the passengers side fender.
How do you tighten the serpentine belt on a 93 Saturn SC2 1.9 liter dohc?
You don't, they have a tension pulley that does that automatically. If the belt is too loose, the pulley most likely has to be replaced. Thecommi ::: The serpentine belt is held by tention with a automatic belt tensioner. If the serpentine belt is loose, you will most likely have to replace the entire belt tensioner assembly. the assembly comes with a new pully.
How do you change the fan belt on a 93 Chevrolet Cavalier?
If it is a serpentine belt just make sure you draw yourself a diagram (there should be one under the hood somewhere)of how it goes around each pulley.Then just release the tension from the belt by moving the tensioner pulley,then replace the belt.Make sure it is on each pulley all the way before starting the car.
