The tube is from the vent on the fuel pump. Oil that lubricates the fuel pump plunger shaft is supposed to return to the engine by a drain hole in the head casting. It is designed so that if oil does not return but gets into the top of the fuel pump, it is expelled out the tube you are referring to to prevent hydraulic lock of the fuel pump.
Almost any 4 cylinder engine will only hold between 3-4 litres of oil.
Its between the radiator and the engine on the bottom side.
will a 3.2L 2000 Isuzu Trooper engine fit a 3.2L Isuzu rodeo transmission
valve clearance for Isuzu 4ba1 engine is 17.00.
Where is the enginenumber located on a c190 isuzu engine
a 2.8 isuzu/chevy v6
The whole car was made by Isuzu, including the engine.
For the 2.2 liter engine it's located between the fire wall and the engine near the top.
its under the center console between the seats
Behind plentum almost against the fire wall about center of engine block
Yes, but you don't want the 2001 engine, it has more issues than the 1999 engine.
what is the firing order of isuzu 12pc1 engine. tnx
Where can I print a engine/timing diagram for a 1999 2.2 Isuzu rodeo?
Yes, there is a diagram of a 1996 Isuzu Trooper Engine. It can be found in the maintenance manual of the car.
a trooper engine or a rodao engine
isuzu not starting after putting contaminated fuel
Isuzu builds a V12? That is news to me.
8944567412 is the isuzu part #
torque on Isuzu engine head for 4hf1 is 95 lbs
The Isuzu Bighorn is a 4x4 vehicle - a medium sized SUV produced by Japanese company Isuzu between the years of 1981 and 2005. It is front engine and has the option of being rear wheel or four wheel drive.
LN6 is the engine fitted in Isuzu Gemini car. The one asking the question is may be looking for LN6 engine parts.