HERES SOME COMON PROBLEMS WITH Dodge Trucks-I SEE THEM ALL THE TIME-WHAT YOUR DESCRIBING SOUNDS LIKE A BAD CAT CONVERTER-ON THE TRUCKS THE HONEY COMB MELTS AWAY FROM THE INSIDE WALL-MELTS INTO A BALL AN GETS PUSHED BACK INTO THE PIPE PLUGGING THE EXHAUST- AND OR CK YOUR FUEL PRESSURE COULD ALSO BE A FUEL PUMP -BOTH PROBLEMS WILL GIVE YOU THE CONDITION YOU HAVE AND ARE MOST COMON FOR YOUR VEHICLE-ALSO CALL DEALER AND CK FOR OPEN RECALL -THEY HAD A PROBLEM WITH THE DISTRIBUTOR BUSHING IN THAT YEAR CAUSING SAME COMPLAINT
There is no difference in a 1995 dodge dakota with a 3.9 v6 engine and a 2000 dodge dakota with a 3.9 v6 engine and you can exchange the newer engine with the older one.
A 1991 Dodge Dakota will have either a V6 or a V8 engine.
The engine diagram for a 1989 Dodge Dakota be can be found in the Dakota service manual. The manual is available through most auto parts, or possibly at the public library.
Yes. A 3.9 v6 engine from a 1995 Dodge Dakota will fit into a 2000 Dodge Dakota with a 3.9 v6 engine. You will have to swap the intake and exhaust manifolds along with all sensors and fuel rail though.
Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.Dodge does not have 4.3L engine. A 3.7L was not used in a 2000 Dakota. So no.
You can put just about anything in it. The main thing is to use all the engine management components for the new engine. The engine bay is quite large. a modern Hemi works well and a 4.7 from a Dakota is a nice transplant
YesYes
If it is a brand new engine take it back to where you bought it. Because if you do anything to you will void your warranty.
A 1992 Dodge Dakota with a 5.2 L V8 has an engine oil capacity of 4.0 quarts.
A Dodge Dakota with a 4.7 takes 6 quarts with a filter change
Yes, but you will have to use your 1995 intake.
Yes, depending on engine SIZE. (;