The check engine light stays on when the engine computer has detected a malfunction and set a trouble code.
The code can be cleared by unhooking the battery. The light will return if the failure is not repaired.
go to advance and let them shut it off
The check engine light is reset with a scan tool after repairing the failure. Unhooking the battery may turn it off temporarily, but it will return if not repaired.
You will have to get the engine scanned and the necessary repairs made. Then the check engine light can be cleared. Just to clear the light without the repair will result in the light comming back "on."
i have jeep grand cheroke 2008 since the check engine light is on and i don't have any problem when i drive the car but how i reset this light (chek engine ligt on) with thank's
Check engine light. It means there is a problem with the emissions system. Take it to the dealer for repair.
Have vehicle scanned to determine the problem Have vehicle scanned to determine the problem
How do you reset engine light on jeep liberty diesel
A person can rest the check engine light on a Jeep Wrangler by disconnecting the battery. This will also rest other warning lights on the dash.
The check engine light would be illuminated and TPS related codes would be confirmed and/or pending.
Usually indicates a problem in the emission control system - have vehicle scanne to determine the problem
I bought a 92 Jeep Laredo and found it had a 1994 jeep engine in it.
The check engine light on a 2005 Jeep Grand Cherokee looks like this... Here is a link Check Engine Light It looks like a little yellow engine.
If the code is not repaired the light will come back on. The light can be turned off with a scan tool, or possibly with a battery disconnect.
When there are beeping noises and the check gauges light on a Jeep Grand Cherokee Laredo it means there is a problem. The vehicle will need to be stopped and all of the fluids need to be checked immediately.
The check engine light is not controlled by a relay, the bulb is grounded directly by the engine computer.
The engine computer controls the check engine light.
The only proper way is with a scan tool. Unhooking the battery might clear the code temporarily, but it will return if not fixed.
The PCV valve on the 1995 Jeep Grand Cherokee Laredo V6 engine is on the oil filler tube. It is on the top of the engine.
There are pages and pages of things that can turn on the check engine light. You will need to have it checked for codes.
That is the check engine light.
The engine light is on when the engine computer has detected a malfunction and set a trouble code.
dears time to time i have check engine comes jeep cherokke 2004- 6c .pls i want your helape.
It might be your TPS Sensor. They are known to go out. If you turn the key off and on five times the light will go off but after another five turns it will turn back on. Any local mechanic should be able to check it with an OBDII reader.