Best Answer

On the plastic screen to the dash, there will be a little circular 'port' between the speedo and RPM gauges. Open the port, stick a thin skewer into this hole and press the button behind the screen. The timing light will reset, and won't come on again until your tacho reaches the next 100,000K's division. Hope this helps.

User Avatar

Wiki User

โˆ™ 2008-01-31 05:43:31
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: A Toyota hi-lux built in 1999 with a 2.8 deseil non-turbo with only analog instruments on the dash How do you reset the timing light after the belt is changed?
Write your answer...
Related questions

What are analog instruments?

Analog instruments take an level of signal and convert it to a read out. As opposed to digital instruments whereby the same signal is processed digitally to display the same results

Why the series resistor of the voltmeter is high?

why we replace the analog instruments by digital instruments

Why series resistor of the voltmeter is high?

why we replace the analog instruments by digital instruments

Difference between analog and digital instruments?

digital instruments can not read infinite number but the analoge can

Why you change your analog signal into digital?

Analog is changed in to digital so it can be transmitted easily.

What are the two types of readouts or display for instruments and dials?

Digital and analog

How much error is acceptable in analog PF meter?

Old type, analog power factor meters may be considered 2% instruments.

Electronic Instrumentation for measurement and control analog computing and simulation?

electronics instruments

How is digital audio decoded?

To have digital to audio played back it has to be changed back to analog with the use of a DAC or digital to analog converter. The DAC will take the digital signal and try to recreate it as a analog signal.

Why are digital instrument preferred over analog instruments?

Digital instruments can work with discrete information and manipulate it to yield any logical results. Analog instruments cannot manipulate information in a logical form, but can only do other analog forms (ie: any instrument with a needle, such as pressure gauges, (older) volt meters). Manipulating information in a logical way can yield to a much larger, and generally more useful results, like your computer.

What programming languages are used in analog computers?

None. Analog computers are "programmed" by wiring them up with cables and jumper wires. On some the program is even built in at design and cannot be changed.

What are the advantages of transducers over nonelectrical measuring instruments?

Using your terminology, there are three types of instruments. Non-electrical instruments. example Pressure gage that is simply a dial mounted to measure pressure in a hose. Electrical instruments can be sub-divided into two types: analog and digital. Analog Electrical instruments are instruments that are operated with an electrical signal. The gage measures the change in resistance or impedance that correlates to a value of the parameter. Example: Pressure gage in an aicraft cockpit will be wired to a pressure transducer in the back of the aircraft. The electrical signal is processed by a computer that correlates the output to the analog dial. Digital Electrical instruments are instruments that send a digitized values for display. The transducers for this type system will transmit values in digital format or either a On/Off or 0/1 value. Example: A digital pressure system will convert the pressure into a digital value. The computer can use the digital value to display on a computer monitor either as a numeric value or a graphic display such as a colored band. The advantage of digital instruments is that is allows transmitting more data and information to computers and then be shared with different applications and displays. Whereas an analog system has limitations of accuracy of the data.

What are the advantages of analog instruments over digital instruments?

There are many applications where analog instruments are preferred. Example: in earthquake charting, a slow-moving needle detecting disturbances runs for months unatttended. It could be done with digital data and digital instruments but storing many months of data becomes a chore. And to find results is easier on a chart than having to process the data and finally getting a hard copy, while using analogue the results are immediatel visible,not to mention cheaper.

What has the author K D Cross written?

K. D. Cross has written: 'JANAIR vertical contact analog display evaluation program' -- subject(s): Display devices, Aircraft instruments, Vertical contact analog display

When does analog data need to be changed into digital data?

On crossing a boundary in the system from where analog signals exist to where digital signals exist. If no digital signals exist in the system then no such boundary exists and no conversion is needed.

What has the author Donald Fred Schmunk written?

Donald Fred Schmunk has written: 'Analog transferfunction synthesizer' -- subject(s): Electronic instruments

How has cmos changed over the years?

The speeds have increased and the noise has bee reduced it also went from a analog to digital

What are the advantages of digital multimeter over analog multimeter?

The main advantage of a digital multimeter over an analog multimeter is their accuracy.AnswerDigital instruments are not necessarily more accurate than analogue instruments (although they often are), but they are far more robust and, usually, far easier to read without error. A digital multimeter has no moving parts and is unaffected by gravity, so they can be used at any angle, whereas analogue instruments needed to be placed on horizontal surfaces and not subjected to vibration.

What is analog media?

analog media means analog media.

Analog-to-digital conversion is better then digital to analog?


What has the author Vincent F Leonard written?

Vincent F. Leonard has written: 'Analog instrumentation fundamentals' -- subject(s): Electronic instruments 'Analog circuit design' -- subject(s): Electronic circuit design, Linear integrated circuits, Operational amplifiers

How do you write analog?


Analog extensions on a private branch exchange are used typically to support which types of device?

Fax machines standard phone instruments PBX management modems

What converts analog signal information into an analog carrier signal?

Analog Modulation

How are analog signals received?

Analog signals can be received using an analog receiver.