say washer is left of centre, then tension on left =((80*5.5/7)+25)=87.86kg
tension on right=((80*1.5/7)+25)=42.14kg
(theory of moments)
You can do this by using a two coordinate designation of that position: horizontal and vertical.
Vertical and horizontal
vertical
Lines of longitude are vertical but they measure horizontal distance(In degrees,not kilometers or miles)between Greenwich Mean Time(GMT) and you so the lines are vertical,not horizontal. However,longitude measures horizontal distance,not vertical distance.
Discuss the concepts of horizontal and vertical conflict as they relate to Zara.
No it is not
Vertical is defined as the direction or position that is perpendicular to the plane. Horizontal is defined as to be parallel to the horizon.
Two upright vertical posts supported by a horizontal element describes which method of construction?
horizontal and vertical position
Vertical means up and down. A horizontal line goes from the left to the right (or from the right to the left) like this: ----------------------------- A horizontal line goes from a position that is low to a position that is high (or from a position that is high to a position that is low) like this: | | | | | | | | But the word "vertical" does not tell you which direction the line is drawn, just the it is a line.
This is not always true. High velocity pumps can be found in horizontal configurations too. It all depends on the application (sometimes the manufacturer) whether it will be a horizontal of vertical pump.
The pipe must be fixed (not rolled) in the horizontal position. With the pipe horizontal, the weld is vertical. The pipe being fixed requires the welder to weld flat (top), vertical (sides), and overhead (bottom). The pipe must be fixed (not rolled) in the horizontal position. With the pipe horizontal, the weld is vertical. The pipe being fixed requires the welder to weld flat (top), vertical (sides), and overhead (bottom).
You can do this by using a two coordinate designation of that position: horizontal and vertical.
Hi.. For only filmwise condensation, horizontal position gives higher condensation coefficent than verical position. In case of condensation with subcooling in a shell and tube heat exchanger, condensation coefficient is higher with horizontal postion while subcooling coefficient is higher with vertical position. kal....
Very simply (and unimaginatively), the horizontal axis or x axis and the vertical or y axis.
Vertical is up and horizontal is across
B. Radar controller