[object Object]
4cm
100,000,000 copper atoms4 or 5 billionAccording to the link, the diameter of a copper atom is 2.28e-10 m, or 2.28x10-10m. The answer to your question is 1/(2.28x10-10). this can be rewritten as follows:(1/2.28)(1/10-10) = (approx. 0.439)(1010) = 4.39x109.You could say "over 4 billion".
Factors affecting the magnetic field strength of a solenoid are: - length of the solenoid - diameter of the solenoid - current through the coil around the solenoid - number of turns of the coil of current around the solenoid, usually turns of wire - material in the core
Depends on the length the light traveled through the solution and the solution concentration. molar absorption = absorbance/(length x concentration) length is typically in cm and concentration is typically in mol/L
Diameter means the space from one side of the circle to the other, cutting throught the center-most point. To answer your question, it means the eye of the hurricane is getting smaller; the diameter length becoming less and less, thus shrinking. If the eye of a hurricane is shrinking that usually means the storm is strengthening.
Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification for Seamless Copper Pipe, Standard Sizes. It may be manufactured from any of five (5) copper alloys (C10200, C10300, C10800, C12000, C12200) that all conform to the chemical composition requirements of alloys containing a minimum of 99.9% Copper (Cu) and a maximum of 0.04% Phosphorous (P). Available sizes are 1/8" to 12" diameters in regular wall thickness and 1/8" to 10" in extra strong wall thickness. The standard length for copper pipe is 12 feet. Copper pipe is suitable for plumbing, boiler feed lines, refrigeration and for similar purposes.Joints in seamless copper pipe can be threaded, flanged or brazed to fittings of the appropriate joint configuration.
It depends on the length of th cable and the diameter of the copper cable used.
The length of a radius is not the length of a diameter. The diameter is two times the length of the radius.
1.219197
the diameter is the length. the diameter means the length of across the circle. it means the longest length across the circle. the radius is halfthe diameter
If the volume and length of the wire are constant, then silver. If the weight and length of the wire are constant, then sodium is the best conductor.
The length of a radius is half the length of a diameter.
50 diameter to length
The length of the diameter is always twice the length of the radius.
You go to the NEC and look at the chart for developed length and the ambient temperature and the load factor and if it solid or stranded wire as stranded allows for more voltage
Young's modulus or modulus of elasticity is a property of the material. As in both the wires we have copper material the young's modulus will be the same. It does not get altered with length or area of cross section.
The length of a radius of a circle is half of the diameter of the same circle. So, diameter is always twice the radius.
The width, or the length of a circle are its diameter.