It is very easy to adjust the handbrake on a Vectra C. All you need to do is remove the rear console and release the handbrake. Under the handbrake is a cable with a white end fitting, push down the end fitting onto the plastic locking device. Then pull the lever and it will be adjusted.
Probably not has they never work. On vectra b theres a nut under the handbrake gattor, not sure if its same on vectra c
You don't. You get your mechanic to do it. That way you can be sure that you don't do something wrong.
how do i adjust the handbrake of a hyudai elantra 1998 model
under the handbrake
If it has rear drum brakes, it's under the car, where the handbrake cable emerges from inside the car. If it has rear disk brakes, there is addition adjustment inside the rear disks on the handbrake shoe mechanism. This adjustment should be carried out before attempting to adjust the cable.
Which year?
with a spanner.
Try looking under the middle console in your car, you should be able to adjust your handbrake from there
fit an anchor
i dont no
Cable underneath has a nut(s) to adjust.
Put the handbrake on and lift the rubber flap up just below the lever. Beneath that will be a 10mm nut, tighten that to adjust handbrake. 1993 micra should be about 5-7 clicks