0
.7v less than unity for DC operation but unity for AC.
Wiki User
∙ 13y ago
Wiki User
∙ 13y agovoltage gain of amplifire is ratio of output voltage to its input voltage,its charaterstic of amplifier.
Wiki User
∙ 10y agoThe voltage gain of an emitter follower is theoretically 1. In practice, due to losses, it is marginally less than one.
Wiki User
∙ 14y agoApproximately unity.
Add your answer:
Earn +20 pts
Which transister is used in emitter follower circuit?
A: Any transistor of either polarity can be used as an emitter follower, The purpose of an emitter follower is to provide current to the load since it cannot provide any voltage gain
Why emitter follower is used in circuits?
The (Class C, Common Collector) Emitter Follower is used to amplify the available current from a voltage driving circuit that might be disturbed by the load impedance. If the actual voltage value is important, the emitter follower is often teamed up with an opamp which sets the emitter voltage based on the input voltage.
What are the disadvantages of using common emitter amplifier?
Disadvantages of CE amplifier:1. It has a high output resistance.2. It responds poorly to high frequencies.3. It has high thermal instabilities.4. It's voltage gain is very unstable.
What is the voltage gain and current gain for a voltage follower?
In a voltage follower, voltage gain is 1, with an offset of VB-E, and current gain is hFe, limited, of course, by the available current in the supply and by the rating of the transistor.
Why common emitter configuration is preferred?
Reason: The common Emitter mode has voltage and current gain better than the other two configurations(CB and CC). i.e it has a current gain greater than that of CC mode and greater voltage gain than that of CB mode.
What is Voltage gain of emitter follower?
The voltage gain of an emitter follower is theoretically 1. In practice, due to losses, it is marginally less than one.
Which transister is used in emitter follower circuit?
A: Any transistor of either polarity can be used as an emitter follower, The purpose of an emitter follower is to provide current to the load since it cannot provide any voltage gain
What is the advantage of emitter follower?
The advantage of the emitter follower is that it has a positive gain of 1.
Why emitter follower is used in circuits?
The (Class C, Common Collector) Emitter Follower is used to amplify the available current from a voltage driving circuit that might be disturbed by the load impedance. If the actual voltage value is important, the emitter follower is often teamed up with an opamp which sets the emitter voltage based on the input voltage.
What are the disadvantages of using common emitter amplifier?
Disadvantages of CE amplifier:1. It has a high output resistance.2. It responds poorly to high frequencies.3. It has high thermal instabilities.4. It's voltage gain is very unstable.
What is darlington emitter follower?
A darlington emitter follower is two transistors operating as one. Both collectors are tied together. The emitter of the first is connected to the base of the second. The darlington exhibits very high gain. If hFe, for instance, on each transistor was nominally 100, the effective hFe would be nominally 100 squared, or 10000. The emitter follower is a common collector configuration where the emitter tracks the base, offset by the base-emitter forward junction voltage. In a darlington, there are two junctions in series, so the effective junction voltage is about 1.4V. Voltage gain of the darlington, like any emitter follower, is one, or unity. Current gain, however, is limited only by the power supply, the transistor, and effective hFe. In the darlington configuration, current gain is effectively considered to be large enough to be thought of as "infinite".
What is the voltage gain of voltage follower?
A: Voltage follower imply that the output will follow the input without any gain.
Why emitter follower is called so?
Because of the geometry of the common collector configuration, changes in base voltage appear at the emitter. Said another way, what happens at the base pretty much happens at the emitter, and the emitter can be said to "mirror" or "follow" the base. The emitter is a follower of the base, and the name emitter follower appeared and was used.
What is the difference between a CB amplifier and CE and emitter-follower?
I think you mean a common emitter amplifier, which is an amplifier of voltage. Emitter-follower or common collector amplifiers are used to match impedances, or to amplify power or current. The emitter-follower is a type of common emitter circuit that has a resistor between the emitter and ground. The output signal is taken from the point between the emitter and its resistor.
What is an emitter follower?
This is a particular transistor amplifier configuration. In general, the input signal is applied to the base, the collector is connected to a supply voltage, and the output is taken between the emitter and power supply common. One of the characteristics of the emitter follower is the output voltage "follows" the input, but the output is reduced by the Vbe voltage (the voltage drop between base and emitter, approximately 0.7 V for a silicon bipolar transistor).
What is the voltage gain and current gain for a voltage follower?
In a voltage follower, voltage gain is 1, with an offset of VB-E, and current gain is hFe, limited, of course, by the available current in the supply and by the rating of the transistor.
Why common emitter configuration is preferred?
Reason: The common Emitter mode has voltage and current gain better than the other two configurations(CB and CC). i.e it has a current gain greater than that of CC mode and greater voltage gain than that of CB mode.
