no ,plus there are different sizes on the rear,because of multiple rearend sizes
19mm for front and 8mm for rear on 2002-2005 models
This would be the same procedure as any other front disc set-up. If you don't know what you are doing then take it to a shop.
A car what has front disc and rear drum brakes have front brake pads and rear brake shoes.
Replace rotor / cut rotor & replace brakes.
That would be a front disc/rear drum setup. ABS was available, though it was not a common option.
Disc brakes , front and rear ( there are also a small set of brake shoes in the backside of the rear rotors that are used for the parking / emergency brake )
If the front brake caliper is sticking, the disc may be uneven. Brakes that are left to scrape on the disc for a long time before they are changed will damage the disc enough to cause sticking or slipping.
Need to know if the vehicle has rear disc brakes or drum brakes and which part of the e-brake system you want to remove, front cable, rear cables, e-brake linings, etc.
( 2 rotors on the front ) one for each DISC brake
The truck has 4 wheel disc brakes for stopping. There is a small hub on the rear disks for the parking brake shoes to engage. www.trailvoy.com
basic tools are all that are needed its a simple job. They are disc type brakes.If you can do the front, then you can do the rear.
Vti - rear and front disc brake engine b16 15' wheels esi - front disc brake only engine d16 14' wheels