0
Sometimes, but most of the times first gear is stronger than rear.
A 4 wheel drive vehicle must have the same gear ratio in the front and rear differentials including the rim and tire size on all four corners.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Gear ratio 1988 Chevy k 1500?
Is a rear end in a 88 4x4 Chevy truck the same as the front in gears of a 93 Chevy 4x4
Is there a difference in measurement between the rear springs from front to the rear in a 1968 dodge dart?
Both springs should be the same length.
What are the front and rear axle sizes and gear ratios of a 2000 Dodge Dakota 4x4?
i dont know what sizes they are,but the ratios in front and rear diffs will be exactly the same as each other.
Is 3.0 ford bolt pattern the same on front and rear wheel drive?
Yes.
What can happen if you have two 17-inch rims and two 16-inch rims on your car?
It depends on if it ie front or rear wheel drive or 3 wheel drive. If it is 4 wheel drive, it is not good and will cause problems. If it is either front or rear wheel drive keep the wheels the same on the drive wheels ie. front wheel drive, keep the 17 or 16 inch wheels on the front but make sure they are the same.
Gear ratio 1988 Chevy k 1500?
Is a rear end in a 88 4x4 Chevy truck the same as the front in gears of a 93 Chevy 4x4
Are the spider gears the same in both front and rear axles on a 90 wrangler?
Yes
Are the Spyder Gears the same on a 4wd Chevy Silverado as a 2wd Chevy Silverado?
they would be the same if both vehicles have same differentials . note that front and rear diffs on 4x4, must be matching ratio, to work properly when in 4x4
What is the front diff gear ratio on a 1999 Chevy blazer s10 4.3 LITER?
Same as the rear.
Can you change gear ratios on a truck without changing the rears Say 3.90 to 3.55?
That would be fine if it stayed in the mud ALL THE TIMEand NEVER saw a hard surface. If this is a everyday driver then the front and rear gears MUST BE THE SAME RATIO. If they are not the same it will brake something.
How do you determine the ratio between two sets of gears?
The ratio is the same as the ratio between the number of teeth.
What determines rear axle ratio?
The # of teeth on the ring gear and the pinion gear. There is always more teeth on the ring gear then the pinion gear. And the way you determine the gear ratio is devide the # of teeth that's on the pinion gear into the # of teeth that's on the ring gear and that will be the gear ratio. The 4 gears that are the same size and run together is called the spider gears. Do not count those gears they have nothing to do with the gear RATIO.
Is the front differential the same as the rear on a 1992 jeep wrangler 4.0 straight six?
no, the gears are different sizes and the housings are different shapes
What is the best gear to have for a 88 suzuki samurai with 33 tires with 5.13 gears in rear what should you put in front axle?
Well you have to have the same gear in the front and in the rear of any set of axles so the tires spin at the same rate other wise you would wear your tires out from then skidding all the time, and or brake the transfer case gears...
How do you determine the front differential gear ratio?
It will be the same as the rear axle. Or take the VIN to the dealer, it is coded into the VIN number.
What is the front gear ratio on a 1989 Chevy Silverado 4 wheel drive 5.7 liter 1500?
it will be the same as the rear diff
What does a rear end do in a 18 wheeler?
Same thing it does in any other vehicle. "Rear end", "rears", etc. is commonly used in reference to the rear end gear ratio. If a truck has, for example, 3.58 rear end gears, it means the driveshaft turns 3.58 times for every one turn of the rear end gear. The rear end gears are what makes the tires of the drive axle turn, thus propelling the vehicle.
