I believe they are adjustable. remove the drive flange (6 bolts), circlip, washer and undo locking tab by removing 3 screws. Then you get access to the main hub nut which you can adjust before reassembly.
wear gloves, bearings all come out. then you have to remove the sensor off the back of it. along with 6 17mm bolts. How do you change the rotors in the front on a 1998 Isuzu Trooper
On top in front of engine
The thermostat on a 1998 Isuzu Trooper is located on the front of the motor. It is in the top radiator hose where it connects to the motor. To access the thermostat, the hose needs to be disconnected from the motor.
passenger side of motor, top, in front of fire wall
I believe, you have to remove the caliper and bracket. Then remove the axle nut. All the bearings will come off. A very messy project. They are not just knock off rotors like most cars.
The firing order for a 99 Isuzu Trooper 3.5l is 1, 2, 3, 4, 5, 6. The number one cylinder is on the left side in the front as you are facing the car.
you have two seats in the front, and a bench seat in the back
Changing the bearings can become tricky, time consuming and sometimes brutal in front wheel drive assemblies. If you have damaged the bearings (and other stuff you don't know about yet) through abuse or accident you may find it easier and cheaperto get the whole front axle from a pull a part place; that's right' plug and play! The front wheel drives on alot of troopers where never used; secret's out now.
they are not adjustable they are sealed units
Junk yard? E-Bay?
just behind the wheel well of the right front tire its a silver color looking thing
The fuel filter is located under the frame in front of the passenger rear tire.