0
You can. Just don't have the gain turned up all the way and listen for distortion from the subwoofer. After you hook the amp up, turn the gain all the way down, turn the stereo up as loud as you can. At the point where the regular speakers start to distort, turn the volume down just to the point that the music is clear then slowly turn the gain up on the amp just to the point that the sub starts to distort then turn it down to the point it sounds clear with no distortion and you just balanced your system. You should never have a problem or hurt your sub.
Wiki User
∙ 11y ago
Wiki User
∙ 12y agomy 400 watt amp pounds my 3 jl 10's not to potentual but not bad
Wiki User
∙ 13y agoyes you can just run them straight from the amp to the sub an it will work
Wiki User
∙ 13y agoyes
and with a machine shop some pulleys and belts perhaps you can mount 5 extra 80A alternators to power the amps
Wiki User
∙ 13y agoYes, with 600 watts of power.
Add your answer:
Earn +20 pts
Can you use a 1000 RMS watt amp on your 500 RMS watt sub just to test if it puts out sound without blowing the sub?
You will most likely blow your sub
Can you power a 1300 watt sub with a 1500 watt amp?
Yes, are we talking rms or max? If its rms you will have no problem. well the amp is a 1500 watt max but 350wx1 rms in 4 ohm
What size amp do you need for 6 and a half Sony speakers that has 190 Watt peak power and 40 rms and Sony 6 by 9 speakers that has 300 Watt peak power and 60 rms?
200 RMS 4 channel or 2 channel so u know add the rms of the speakers to find the amp rms needed
What size of amp would you need for 2 dual 12 inch subs they're are 4 ohms 175 watt rms 500 watt max?
since u have two I would say 400 or 500 rms apm
If your subwoofer is 350 watt RMS what watt RMS amp should you run it off?
biggest u can afford!
Will an amp of 1400-watt with 700-watt rms blow a sub with 1100-watt peak and 600-watt rms?
nope your powering it just right
If you have a 300 watt RMS and 1000Watt peak power sub-woofer what rating of an amplifier should one consider using?
an amp with 300 or less rms wattage output and 1000 or less peak wattage output.
How do you know what kind of subwoofer goes with what amp?
a 500 watt sub woofer puts out 250 RMS a 500 watt amp puts out the same and if you want a good setup get a sub with RMS and a amp with 1200 max so 600 RMS will be powering the same 500 RMS sub woofer then you can tune it to push the sub woofer a bit and the sub woofer should take it I recommend ether mono single channel 2 channel brands go name brand if u want support later or go no name to be different
What Size amp should I get for a 900 watt RMS subwoofer. Im not sure of the max power.?
the subs rms tells you what u need.. so a 900 watt rms sub would be best with an amp from 800-1000 watts
Can a 1200 watt amp give good bass to 2 kicker cvr 12's?
It depends on the rms of the two cvrs combined. Also if the 1200 watt amp is 1200 watt rated (rms) or 1200 watt peak. Lets say the two kickers have an rms of 600 watt each, and the amp is 1200 watt rms, which it probably isnt but i'll pretend. This set up would work because 600 of the amps watts would be correctly matched with one sub, and the other 600 would go to the other sub.
1 watt RMS equals to how much PMPO?
1 watt RMS equals to 100PMPO , accordingly 1000watt RMS equals to 10,000 PMPO. check out LG Home Theater HB954TB for the same.
What size amp do you need if your sub is 300 rms?
300 watts or less.
