Do you need the engine to be running when adding transmission fluid to a 1995 ford aerostar
Yes, but you have to remove the automatic transmission housing, and you have to replace the Torque Converter with a standard transmission clutch that matches the type of transmission with which you are mating the engine.
That would be a 4L80E automatic transmission.
wich one radiator, engine or transmission (manual or automatic)... wich one radiator, engine or transmission (manual or automatic)...
The question is if the transmission is a standard or an automatic, if it is a standard then the transmission is located directly behind the bell housing which is bolted onto the rear of the engine, if it is an automatic then the transmission is bolted directly to the rear of the engine
Standard cab with a 4 cylinder engine and automatic transmission is rated at 5600#. Standard cab with a 4.3 V6 engine and automatic transmission is rated at 6000#. Extended cab with 4.3 V6 engine and automatic transmission is rated at 5500#.
No. You can remove the engine and leave the transmission in the vehicle.
The automatic transmission for a 1993 Ford Escort is a 4-speed automatic with overdrive. It also has a 1.9 liter engine and an 88 horsepower.
Could be a transmission problem, assuming an automatic transmission.
automatic or manual transmission ?
It's the 4L60-E electronically controlled transmission. The engine PCM controls engine and transmission
There is NO "Reservoir" for a AX4N, Automatic Transmission. There is an oil pan and a torque converter which is between the engine and the transmission where it bolts to the engine.
5w30 for engine oil. Dexron 3 for transmission fluid on an automatic.
The automatic transmission dipstick is located towards the passenger side of the engine compartment , by the firewall . next to the engine
your question is a bit ambiguous if you are talking about he engine oil filter it has nothing to do with the transmission do NOT put automatic transmission oil in the engine you will blow the engine
The torque converter for an automatic transmission is inside the bellhousing area of the automatic transmission , the end of the transmission that is bolted to the engine
The automatic transmission fluid dipstick is just to the passenger side of the engine by the firewall
On a 1996 Ford Mustang : The automatic transmission fluid level dipstick is located in the engine compartment , near the firewall , on the passenger side of the engine in the engine compartment ( use a funnel )
In a 2000 Ford Mustang , 3.8 liter V6 , automatic transmission : The automatic transmission fluid level dipstick is by the firewall , in the area near where the transmission bolts to the rear of the engine , on the PASSENGER side of the engine in the engine compartment
A 1999 Ford Explorer Eddie Bauer has the 5R55E automatic transmission with the 4.0 liter SOHC , V6 engine , and the 4R70W automatic transmission with the 5.0 liter V8 engine
That is a 350 engine.
NO!!!! do not do this, oil is oil, transmission fluid is transmission fluid, and antifreeze is antifreeze, do not mix any of these, it can perminately damage your engine.
hopefully, ... bolted to the engine