0
As Long as Your Alero has a 3.4, You should be good.
#1 - You will need to change the timing cover, some of the pulleys are in a different spot.
#2 - The motor mounts are different, they will need to be changed over.
#3 - The fuel rails connect in a different spot on the engine, you can change them if you want, but it's not necessary.
FYI - 3.4 is notorious for Lower Intake Manifold Issues until 2004. The gaskets leak because they are plastic. If you're going to buy a used motor, look for coolant in the oil and around that manifold area first before you buy. The gasket set is about $120, and it takes a few hours to replace them.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you change wiper blades Oldsmobile alero?
All model years of the Oldsmobile Alero have hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
How do you reset check engine light 1996 impala ss?
Fix the problem and hook up a tech 2 to it and clear codes
Will a 350 engine from a Oldsmobile fit in a 1990 305 caprice and if so what type of modification will you have to do?
yes, it will fit, but nothing will hook up, including the transmission
Can the transmission of a 2000 Oldsmobile intrigue be removed from the bottom of car without removing engine?
Yes ... You need to support the engine from above,there is a hanger that attaches to the top of the shock towers that has a hook on it that will support the engine, when you remove the engine cradle (frame) below.
How do you get the rear speakers to work on a 2000 Alero?
hook the speaker wires up to them and turn the volume up.
How do you set the points on a 350 1973 Chevy Impala?
Hook up a dwell meter and turn the 1/8" hex screw on the point set to achieve 30 degrees dwell. (Engine running)
Where can you find radio wiring diagram for a 2001 Chevy Impala ls?
To hook up a radio in a 2001 chevy impala do i need the charm or can it be direct wired
How do you take the motor out of a 1985 Chevy Impala?
cut all the hoses and wires and hook a chain to it and rip it out.
How do you remove Chevrolet impala wiper?
The Chevrolet Chevy Impala has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Where do The hoses that come out of the heater core hook to on the engine?
the hoses hook to the back of the engine one on the right and one on the left, best way to work on these is from the underneath.
How do you install wiper blades on a 2006 Chevrolet Impala?
The 2006 Chevrolet Impala has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
How do you change wiper blades on an 07 Chevy Impala?
The 2007 Chevrolet Impala has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
