Ford Ranger

Can a 6-cylinder ranger transmission fit in to a 4-cylinder ranger?

001

Top Answer
User Avatar
Wiki User
Answered
2014-08-22 23:38:01
2014-08-22 23:38:01

Several factors are involved with the ability to swap these transmissions. Depending on the Ranger year, the bellhousing and clutch systems can be different sizes, as well as the mounts. With the year of the Ranger and the 6 cylinder transmission then you can determine if the switch is possible.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


Will a 1997 Aerostar transmission fit in a 2000 ford ranger?



No. From 1983-84 Ford used the C3 transmission. A 1990 will not fit.


A better question is why would you want to put a ranger transmission on a mustang


will a 352 fit in a ford ranger


it should fit as they both have the same engine but is it manual or automatic


what are the years and kinds of Automatic transmissions that will fit in a 2.3l 97 ford ranger 4x2


what does a fuel pump look like in a 1989 ford ranger 4 cyl.


A 5.0 liter engine will fit in a 1994 Ford Ranger with some modifications. The position of the transmission, motor mounts, and wiring will all need to be changed.


What make and model ford 6 cyc will fit 96 mazda


yes it will ,but use the torque converter from 89 trans


no the transmissions are different and it wont work.


no the c4 is not compatible with the 302 you would need a c6


No, the 1.8 is a Front wheel drive engine and will not in any way fit into a Ranger.


Yes if they both have the same engine size and both are either 2wd or both are 4wd.


Check with your local salvage yard they may know off the top or can look in a manual for that


As long as it is the same engine, you also have to swap some other parts out such as the clutch petal.


should but check with junk yard they have the book


Yes , a cummins 4bt (4cylinder out of bread truck)



It mostly depends upon the motor that is in your vehicle and the motor in the vehicle in which you are removing the transmission from. It should work as long as they are removed from the same motors. The transmission on a 4cyl will not bolt to a 6cyl. www.FordRanger.net


doors from 1986 to 1992 are the same for ranger bronco. yes will fit


Updated --- No, because starting in 1994 ford started using Mazda engines. So the 1999 ranger will have a whole different transmission than the 1993. Incorrect.-------- Mazda has manufactured transmissions for the Ranger since 1988. The model numbers are the same from 1988 to present, M5OD-R1, with the exception of the 1997 to present 4.0 SOHC, which uses the M5OD-R1HD transmission.


No. Ford Rangers may have a variety of manufacturers parts in one engine. For example, my Ranger has a Mitsubishi motor with a Mazda transmission.


Yes the trans will fit 4.0 motors but check the electrical plugs on the 03 and make sure they are the same as the 99s if they are!You should be able to swap one to the other



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.