Yes you can. All the 1300 mA rating means is that adaptor can supply devices up to 1300 mA. The old adaptor's limit was 800 mA. The new adapter has 500 mA more in reserve if it is ever needed.
The adapter's voltage must match that of its load, and its current rating must exceed that of its load. So you can use your 6-V/1300-mA adapter to supply your 6-V/200-mA device.
Yes, you can use a DC 6V 800mA AC adapter in place of 6V 300mA adapter. The 800mA represents the maximum amount of current that can be drawn from the adapter without it becoming overloaded. As long as the device that you are plugging into the 800 ma adapter does not draw more that 800 ma it will work.
Yes, a 6 volt 800 mA adapter can be substituted for a 6 volt 600 mA adapter. The 800 mA adapter will just have a higher output capacity than the 600 mA adapter. You will have the ability to connect devices that have a higher amperage draw. Where before the maximum device that you could connect would be 600 mA now you can connect devices that draw up to 800 mA.
yes.
No, the voltage of the replacement adapter must always be IDENTICAL to the original adapter and the current of the replacement adapter must be the same or larger than the original adapter.Trying to use a 9 Volt adapter to replace a 5 Volt adapter will almost certainly completely destroy the device the moment you plug it in.You did not say whether the adapters provided AC or DC or the polarity if DC. Either way both the replacement adapter and the original adapter must be IDENTICAL in this respect.
You can use the REPLACE using below code SELECT TableName APPEND BLANK REPLACE FieldOne WITH THISFORM.TEXT1.VALUE REPLACE FieldTwo WITH THISFORM.TEXT2.VALUE REPLACE FieldThree WITH THISFORM.COMBO1.VALUE REPLACE FieldFour WITH THISFORM.COMBO2.VALUE
A: Disregarding the fact of different voltages there is the power to be concerned 9v x 1A = 9W, 15V X .8 = 12W. THE DEVICE WILL BE UNDER POWER.
Levers will wear and tear after use and money will have to be spent to repair or replace them.
Because , it will be easier to use , remove & replace a cascaded ic .
no, must be 3v
No, Your original adaptor has an output of 3 amps or 3000 ma. As you can see, the one you want to use for a replacement adaptor only has 1000 ma output, one third of the current capacity that you need.
You can use a wired adaptor if you're using a game boy advance.
A SIM card adaptor will allow you to use a micro SIM in a standard SIM slot.
A SIM card adaptor will allow you to use a micro SIM in a standard SIM slot.
The Smartjoy X Adaptor is use to hook up your xbox controllers to your PC
Use the 9 volt setting.
Yes, as long as your Epson projector has an HDMI slot, or if you use an HDMI-to-VGA adaptor (an HDMI-to-RCA Video adaptor can work as well).
yes, you can.
One uses a cassette tape adaptor to play music through sound systems with a tape player. By using this cassette tape adaptor, one does not need an auxiliary input.
Yes.
you use it for catching Pokemon but you need a wireless adaptor (emerald version)