SOME Power Drills are made that can do both but not all power drills will do this - you need to read the instructions for the drill.
Power is transmitted between the drill spindle and drill shank through friction drive (Taper shank push fitted into spindle taper)
Most handheld electric drill are "portable" - the most portable are those that run on a battery. A hand help drill can be used to make holes in wood, metal or masonry. so that things can be joined together with screws. Many portable drills will also have an attachment to drive screws too.
Drive screws are more commonly used in place of nails in building today. The screw has a Phillips or square drive head, and is driven in with a drill.
You need deck screws to build a deck.It really takes a powerful drill to drive them too.
Suck it up and drive on. There is a reason the Drill is treating you like crap. Fix yourself and then the Drill will leave you alone
Depends on it's usage. An 18 is more powerful and will drill more holes or drive more screws, but is quite heavy to use if for instance you are working on a ladder or drilling upwards. In those case a lighter 12 is better.
You have to get Deck Screws for building a deck.You need a drill with a lot of torque to drive them too.It will take a great deal of time to do it by hand.
Don't let your hands near the drill bit or drive belt while they are moving.
Yes, normally 110 or 240 volt units but these must have a graded slipping clutch with reversible drive switches.
You can learn to do Mac hard drive recovery at Disk Drill. Hard drive recovery can be tricky, but Disk Drill makes it easy and simple. They can help you get your data back quickly.
It sounds like you need a variable speed drill. There was an item on the market a few years ago that you could plug your drill into and control its speed. I haven't seen one lately since most new drills have variable speed built into the drill. On a drill press all you need to do is move the drive belt to the smallest pulley on the motor and the biggest pulley on the drill spindle.
Slide on a quick change bit and screwThe screw finder is for slotted screws. Using a power drill/driver with slotted screws in one of the most frustrating jobs for handymen. Unlike Phillips head screws you must keep a right angle while driving and rely on your own coordination to keep the bit aligned with the slot. The screw finder slips around one of those long quick-change slotted bits and a flat head screw to take care of alignment. Answer #2This is what the piece looks likehttp://images.orgill.com/200x2006135248.jpg- the right end fits into the drill, the left side slips over the the screw itself. The screwdriver bit is actually inside