0
The magnet on the surface and the metal 300 ft down - no. Lowering the magnet to the metal, then lifting - yes.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
What is 1500 feet of water converted to psi?
If we have six (6) feet of water, that will convert to about 2.6 psi (pounds per square inch).
What is the PSI at 400 feet below sea level?
The pressure of liquid acting on a container or other body increases at the rate of 1 atmosphere or about 14.7 lbs. per square inch for every increase of 33 feet in depth. So doing the math results in: 400ft./33ft. = 12.121. Multiplying that by 14.7 lbs. per square inch yields about 178 lbs. per square inch at 400 feet deep.
What are the units used when measuring the depth of water?
Depth of Water Measurement.Water is measured by many strategies such as a sounding line, depth guages (based on pressure) and by sonar messurement. Before the moden age, sailors would throw lead weighted lines into the water. These were marked off in six foot increment (fathoms) and would call out the depth, or int he old English phrase - sound off, hence the term sounding the depth.Submarines brought a new requirement for depth measurement, the need to know how deep the boat was in the water. Since water has weight, there is a direct correllation to the depth of the water and the pressure outside the submarine. Most depth guages are calibated in feet or meters of seawater as most submarines operate in salt water, which is heavier than fresh (non-salty) water.Modern electronics has now allowed sophisticated measuring devices to bounce waves off the bottom and determine exaclty the depth of water that a boat is in. This is now used on many pleasure and fishing boats as a necessary navigation aid.Satellite detection of water depth is now used to determine changes in fresh water reserves on continents and to determine the changes in climates and geography.
What is the depth of the Luray caverns?
The Luray Caverns have a depth of approximately 120 feet (37 meters) from the entrance to the lowest point.
What depth does the titanic lie in the Atlantic ocean?
The average depth of the Atlantic ocean is 10,955 feet. The deepest part of the ocean is about 28,232 feet deep in an area called the Milwaukee Deep.
What is the water pressure in psi at a depth of 300 feet?
At 300 feet of water depth the pressure is about 130 psi
300 feet of sea water equals psi?
About 130 psi at 300 feet of water depth.
What has more pressure on an object 260 feet depth of water or 35000 feet of altitude?
The 260 feet of water: at that depth, there is the weight of the water and the atmosphere on top of it.
What is the depth to which this Seiko is water resistant?
660 feet is the water proof depth.
How many feet of depth is 1000 atmospheres?
1,000atm is about 33,900 feet of water depth.
A rectangular pool is 20 feet by 30 feet. The depth of the pool is 60 inches but the depth of the water is three fourths of the depth of the pool. What is the volume of water in the pool?
It is 2250 cubic feet.
How deep in the water is one atmosphere?
4 atmospheres is about 135.6 feet of water depth.
Water preesur at 5000 feet deep?
5,000 feet of water depth is about 147.5 atmospheres.
Is 232 feet deep a good well depth for a water well?
If that's where the water is. At that depth, it should be fairly good water, well filtered by the time it get to that depth.
What is the depth of water that is 72 feet?
Twelve fathoms
How many feet under water is 10 atmospheres?
10 atmospheres is about 340 feet of water depth.
What is the psi at 5400 feet under water?
At 5,400 feet of water depth the pressure is about 2,341.1 psi
