i have ran a tube for 4 years due to slow leak in rim ..no problem I am now going to replace tire and replace tube at same time and will smooth out inside of tire to be free of rough marks
A tubeless tire is a tire that does not use an inner tube. A couple disadvantages are they are heavier which results in a decrease in mileage and if the tire becomes punctured it is more expensive to fix.
would not plug a tubeless tire or tire tube comb.bad idea!only thing holding you to the road.think about it.
YES, AN INNER TUBE CAN BE USED CAN BE USED TO SUPPORT RADIAL TIRE, BUT IF THER US SIGNIFICANT SIDE WALL DAMAGE THIS IS NOT RECOMMENDED.
Yes, you can use a tube in a tubeless-ready bicycle tire, although it may not provide the same benefits as a tubeless setup. A tubeless-ready tire is designed to run without an inner tube, creating a seal against the rim that holds the air in place. When used with a tube, the tire will function in much the same way as a traditional tire and tube setup, but it may not provide the same level of puncture protection or weight savings as a true tubeless setup. Additionally, some tubeless-ready tires may not be compatible with certain types of tubes, so it's important to check the manufacturer's specifications before using a tube in a tubeless-ready tire.
If it is tubeless then patch the tire on the inside. If it has a tube patch the tube.
yes siree
Before modern tires, automotive tires used a different method for holding the air pressure inside a tire. The inner tube is a piece of rubber shaped like the inside of the tire. The tube has a stem and valve into which air can be pumped. The inner tube is placed inside the tire, the tire is fitted onto the vehicle rim, the stem is pulled through the hole in the vehicle rim then compressed air is forced into the inner tube. That method was used for many years and is still used in bicycle and most motorcycle tires. Today, truck, automobile and many motorcycle tires are "tubeless", meaning that the tire uses a thin coating of sealant material on the inside of the tire surface. The tire seals against the rim, which is designed to fit tight against the tubeless tire.An inner tube is the tube inside a protective outer tire that is generally used to hold air and keep the entire tire inflated to a proper level. They are very fragile in many cases and therefore need some sort of outer protection in order not to become easily punctured. If one does become damaged, it may be possible to repair the inner tube with an inexpensive patch. Also get mor information in detail at Tyreonwheels
A tire that is designed to seal on a rim without a tube inside.
No. Spoke wheels are not designed for tubeless tires. Tube only.
According to Dunlop's site, "With a tube inserted, a tubeless tire may be fitted to a tube-type wheel." They offer one warning though: "Do not fit tubes in radial motorcycle tires, nor fit radials on rims requiring tubes, unless the tubes bear matching size and radial (R) markings." http://www.dunlopmotorcycle.com/infocenter_tiretips.asp?id=20#tip So, as long as the tube is marked for radial use, you shouldn't have any problems running a tubeless radial tire with it. The same SHOULD apply to Bias ply tired, but I can no confirm that.
All Laced wheels on Harleys are tubed, the tires are tubeless, but you need a tube AND rim strip on laced wheels
They don't have inner tubes - those are tubeless tires.