yes,you use acid
If it's pourous concrete (not smooth) then I'm not sure if my solution will work for you, but here are a couple of suggestions.Remember: Always use proper ventilation and recommended safety equipment when using any chemicals!!!Mop it with a bucket of HOT water and strong bleach solution (1 cup bleach to 1 gallon of water) Repeat one or two more times after floor has completely dried.Gets some amonia and put it in a spray bottle and spray the entire area.----------------------------------------------------------------------------------------------------------------------White vinegar! I used this and it was a miracle.
The ExxonMobil Beaumont refinery was built in 1903.
It can be up to 40 percent in modern plants, less in old ones
The best gas mileage from unleaded gasoline or premium gasoline depends on the car. Old cars get better mileage from unleaded.
In the old days this was a common treatment-- It is now against the law-- But it killed the roots of trees on the drain filed and helps restore a little use to the drain field.
You must rough up the old finish, use sandpaper. Then apply the heat resistant paint
No, you should not apply urethane over deck stain. You should sand down the old deck stain first before applying any other type of finish.
You finish your period for ever when you are 50 years old.
The cement may not have been sealed properly, which would allow water to seep in the small cracks. In the winter the water freezes and expands causing the cement to crack and crumble. the finish on the concrete was not done correctly.trowel finished pushing the stones down from top of surface then sealed. concrete setting up before finish steps done.
stress in old concrete
Finish your pun old goats never die but they grow old and breed.
Providing the wood is already free of any old finish, paint or dirt, apply the stain with a clean, dry cloth. If it's a large project apply the stain to small area at a time, using the wipe on, wipe off method - meaning after you wipe the stain on, going with the grain of the wood, use another cloth to wipe off any excess. Allow the stain to dry thoroughly. Once it has dried apply the finish with a short nap sponge roller for larger projects and a brush for the smaller jobs.
When the VCT is old and worn. When there is possibility of staining. When there is high traffic. When you want the floor to really shine after applying floor finish over 2 coats of sealer.
to prevent further damage
The cheapest thing is to refinish the cabinets. Strip off the old finish with a liquid or gel stripper (cover the counters and floor first). Then wipe the cabinets down with denatured alcohol. When dry, apply 3 coats of clear finish (acrylic or oil based). Let dry and clean up.
Latin Latin Old French Old French Middle English Finis------> Finire ------>Fenir ----------->Feniss ----------->Finish
how old can you apply for a borders rewards card