Connect the router to the modem using an Ethernet cable. The router can then transmit the WiFi.
You can not connect a DSL modem/Router to a Cable modem the are two completely different devices. Basically one speaks English the other speaks Mandarin and neither has Rosetta Stone.
Use router and ethernet cable for a cable or DSL modem
dsl cable router
A DSL/Cable Modem that is combined with a wireless Router.
Cable/phoneline---->Cable/Dsl Modem---->Wireless Broadband router
1. Dial-up - You use a dial-up modem in your computer to connect to the internet over a phone line. 2. Ethernet - You connect to a cable / DSL modem with an Ethernet cable, either directly to the modem or through a router. 3. Wi-fi - You connect to a cable / DSL modem with a wireless card to a router, which is connected to the modem. 4. USB - you connect to a cable / DSL modem directly with a USB cable. 5. 3G - A form of wireless internet that communicates using cellphone towers.
Yes you can, you have to do that like following. Connect one DSL wireless modemrouter to the cable modem, and another wireless modem connect in the first wireless modemrouter. You have to understand that internet speed on the first DSL router will be rather higher then for the second one.
The question would be easier to answer if you included the specific model # of the Netgear router you are trying to configure. You can not connect a netgear router or any other router directly to a DSL line unless it also functions as a DSL modem. You can connect a router to a DSL modem which connects to a DSL line.
A router or possibly a data switch can connect two PC's to a DSL or cable modem.
A router is used for connecting multiple computers to a single connection, but it doesn't provide the actual connection. You still need a cable modem or a DSL modem to connect to the router to provide the connection to the internet. Usually on the back of the router there is one port marked internet or uplink that you'll need to connect to the modem you get.
What describes the external IP address that is obtained by a router through a cable or DSL modem?
Find a Broadband or DSL internet provider or if you already have one and are already using it connect a router to your modem. Then simple connect an ethernet cable from your modem to your router and one from your router to your PS3. The cable that was going from the modem to your computer now goes from your router to your computer. If you are not using the internet service before then just connect th ethernet cable from your new modem to the PS3. Then if you do get a computer just buy the router and the ethernet cables then.
Connect a router to the DSL modem, and if necessary add a switch to the router. Then connect all of your systems to the switch and the router.
You plug you router into your cable or DSL modem with an ethernet cable. Then you either search for the WiFi signal from a Wireless router or connect an ethernet cable between the router and PS3 on all types of routers
If you have an ethernet cable plug it into the modem and they should be connected. My Modem is connected with a router to the rest of the network and with the internet modem and is both wireless and wired
The two technologies are not interchangable, and the hardware used to connect (DSL modem or Cable modem) are not likely to work with the other.
At least you will need a router even if you have a modem.If you get the router from your provider, all the configuration may be done automatically.If not, it may be possible that you have to configure the router by yourself. In this case it needs the credentials in order to get access to the internet. How to configure the router is explained in its user-manuals.a DSL/cable router
You connect the PS3 to the internet with Broadband internet service and a cable or DSL modem and router. see related link
You plug your wireless into dsl router (you'll need to configure your router), and then configure your computer to the wirelessJust get a lan cable which is usually ships with wireless routers. Connect one end of the cable in wireless router port which is called wan or intertet. Another end of the cable connect to your modem. Then restart the modem and the router. Sometimes you might need to change settings for internet coneection and DHCP server. But usually it's not required.
You have two basic options. 1.You can connect your laptop to your cable, fibre optic, or DSL modem or Ethernet port using an Ethernet cord. 2. You can connect your cable, fibre optic, or DSL modem or Ethernet port to a wireless router using a Ethernet cable. You then connect your laptop using wireless to your wireless router.
There is a big difference between a cable modem and a DSL modem. There are many types of both available and these options can be viewed on Amazon. A cable modem uses a coxial cable input to connect it. However, a DSL modem uses a phone cord in order to function.
# Connect a DSL modem to the DSL line # Connect an Ethernet wire from the modem to the Mac. # There is no step 3. Unless you want to stick a router in between and get a network going.
No, you do not. But if you want to use cable, DSL or phone internet, you need a modem.