0
No, It will just take the teeth off of the blade. You can buy a blade for your skilsaw though.
ANS 2 - Never seen a skilsaw blade that can cut brick safely - but it's easy to do on a tile saw.
Wiki User
∙ 11y ago
Wiki User
∙ 11y agoNo, bricks are much too hard to be cut with a standard blade. You can get diamond tipped blades, but I'm puzzled why you are using a jigsaw for cutting abrick -there are easier ways.
Add your answer:
Earn +20 pts
Calculate How many bricks for a fire pit?
I have a 3 and a half foot diameter and want the pit to be 24 in tall. How many fire brick do I need if the bricks are 3 by 7
What are the disadvantages of fly ash bricks over fire clay bricks?
fly ash brick have light weight over the clay brick... but the mechanical bonding strength is weak but this can be rectified by adding marble waste....this s one of the disadvn
What is furnance masonry?
certain furnaces use fire bricks to prevent hotspots and to help retain heat within the fire box, this is where you would find masonry in a furnace application. in most cases the fire blocks are dry stacked along the sides and bottom.
When do you need stortz connection?
Stortz connections are used to connected lengths of fire department water supply hose, or to connect a fire pumper to a structure's sprinkler and/or standpipe system. They provide a 1/4 turn 'sexless' connection, which is normally faster and easier to complete than a threaded coupling. The type of connection used to supply a structure is regulated by the fire code that applies to the jusisdiction where the structure is located. Designers and engineers should consult with their local Fire Marshal to determine the correct type of connection for their local. Using this type of connection for fire department supply hose depends on the standard operating procedures for hose in place at the fire department. Designers and engineers should conact their Fire Chief's office to determine these procedures.
When was Tabriz Fire Fighting Tower created?
Tabriz Fire Fighting Tower was created in 1917.
When was Blade of Fire created?
Blade of Fire was created in 2007.
How do you make bricks on Doodle God?
clay+fire=bricks
What is the name of fire bricks used in an oven?
alumina bricks
How many pages does Blade of Fire have?
Blade of Fire has 574 pages.
How do you make bricks on doodle god 2?
Fire + Clay= Bricks
What is the ISBN of Blade of Fire?
The ISBN of Blade of Fire is 0-439-84122-4.
What kind of fire bricks are used for molten blast furnace slag?
What kind of fire bricks are used for molten blast furnace slag?
What are some properties of a fire brick?
There are many properties of a fire brick. The primary and most notable property of a fire brick would be that fire bricks heat up to a higher temperature than other bricks.
What material is made to make bricks?
Fire bricks are made of ceramic materials and have a low thermal conductivity
What are the ratings and certificates for Fire Blade - 2002 VG?
Fire Blade - 2002 VG is rated/received certificates of: USA:T
How do you make a bricks on doodle god?
Clay + fire
Is the fire blade of awe permanent?
no
