No ! they are not compatible together ! ther lubrication properties are different and they don't mix well toggether !
not really
Basically no Adding mineral to synthetic oils destroys the characteristics of the oil. Adding synthetic to mineral is waste of the more expensive synthetic oil with the same results as above. If you have to mix in emergency, get a complete oil change ASAP. You can use either mineral or synthetic oil for the same application but not mixed. Synthetic oils in cars is now used as it gives longer service intervals- typically 12 months or 12,000 - 20,000 miles. Mineral oils break down quicker and require changing more frequently 6 months or 6,000 - 10,000 miles
You can mix part synthetic oil with full synthetic oil.
Sure. But never mix the two. If the crankcase has synthetic in it, only top it up with synthetic, and vice-versa.
It is a 2 stroke and the ratio depends on what type of oil you will be using in it. The oil base stock is either petroleum, semi-synthetic or synthetic oil and is mixed with gas at a ratio ranging from 16:1 (petroleum) to as high as 100:1 (synthetic). My 2 stroke I have is a 2001 Kawasaki KDX200 that I run Yamalube 2R at 36:1 with no problems. Although synthetics say you can mix them at 100:1 I would not, that seems way too lean to me.
Yes, that is what a synthetic blend is that they sell.
From what I have been able to research most manufacturers recommend using 10W-40. You should change oil every 500 to 800 miles. And it is better to use a synthetic oil versus a mineral oil, eg; Mobil 1 synthetic, as synthetic oil does not create the sludge that is prominent with standard petroleum based mineral oil. Hope this information is helpful.
Yes you can mix different brands but I recommend you do not mix different weights. You can even mix synthetic oil with conventional oil. But as the weight of the oil is critical, do not ever mix one weight of oil with another, no matter if it is synthetic or conventional oil.
You mix 2 stroke oil with your gas, slosh the can lightly to mix it good, then pour it in your gas tank. The proper ratio will depend on what type of oil you will be using for your premix. The oil base stock is either petroleum, semi-synthetic or synthetic oil and is mixed with gas at a ratio ranging from 16:1 (petroleum) to as high as 100:1 (synthetic). My 2 stroke I have is a 2001 Kawasaki KDX200 that I run Yamalube 2R at 36:1 with no problems. Although synthetics say you can mix them at 100:1 I would not, that seems way too lean to me.
If it is a 4 stroke then use SAE 10w-30 100% synthetic. If it is a 2 stroke use a 2 stroke 100% synthetic oil.
Yes, you can. It is even sold as a Synthetic Blend.
Most oil is natural, especially if it is not mineral oil. However it is possible to make a synthetic oil.