From a paint contractor in Arizona. Yes you can sand good enough to break the glaze. and than by a good latex enamel paint and give 2ea. coats. with time to dry between coats.
Yes, you can, but test a small piece first. Some so called enamels will wrinkle under lacquer.
Try spraying after sanding the wood object first.
In most cases yes, you can apply acrylic enamel over lacquer primer. Test a small area before proceeding.
It will not last very long. Much better to use a full enamel spray or an epoxy base.
If the base coat used in your project is water base then yes, you bet you can. If there is any chance that the base coat used was an oil base paint then you cannot paint directly over it. The acrylic enamel will not adhere to the oil base paint and will begin to peel off as soon as it is dry. In which case a coat of primer is in order.
yes, after you spray it with OTMAN SPRAY PAINT you will need to let it dry completely, then apply a polyurethane coat to protect it unless the manufacturer states it does not need a finishing coat
A clear enamel spray will just absorb into the cork. You might as well use the paint straight. Get a stain kill primer or a shellac based primer ant coat the cork prior to painting.
No, it isn't in certain applications, but for some applications, like exterior use in a sub-tropical climate, where harsh sun and high humidity will cause the enamel to chalk and mildew fairly quickly, a 100% acrylic paint is an excellent and recommended replacement.
It will not last very long. Much better to use a full enamel spray or an epoxy base.
If the base coat used in your project is water base then yes, you bet you can. If there is any chance that the base coat used was an oil base paint then you cannot paint directly over it. The acrylic enamel will not adhere to the oil base paint and will begin to peel off as soon as it is dry. In which case a coat of primer is in order.
yes, after you spray it with OTMAN SPRAY PAINT you will need to let it dry completely, then apply a polyurethane coat to protect it unless the manufacturer states it does not need a finishing coat
Yes it can. In most instances, the acrylic will actually protect metals without damaging the base metal as it is plastic to begin with. However do not expect it to be permanent. In order for the artwork to be permanent, it needs to be in baked enamel.
I think acrylic waterbase is hydrophilic whilst acrylic polymer paint is hydrophobic
Yes, you can, the base is similar.
A clear enamel spray will just absorb into the cork. You might as well use the paint straight. Get a stain kill primer or a shellac based primer ant coat the cork prior to painting.
No, it isn't in certain applications, but for some applications, like exterior use in a sub-tropical climate, where harsh sun and high humidity will cause the enamel to chalk and mildew fairly quickly, a 100% acrylic paint is an excellent and recommended replacement.
Any paint that has the word 'acrylic' in the title is usually water based.
No, it's not a latex base.
It is very easy to coat enamel paints with acrylic paints but you really should pay attention to a couple of points if you want it to be successful. Always sand the the enamal well and fill any holes with lindeed putty then apply a good coat of undercoat. I use an oil based undercoat first and then several days later sand the undercoat lightly and coat with acrylic all purpose undercoat. Once you have done this you can apply acrylic top coats. If you are using a self priming type acrylic paint on external work, you could skip the acrylic undercoat and apply it straight on to the oil based undercoat but you must leave it for several days to dry completely before coating with acrylic. I have used both methods over the past 5 years and both have not shown any sign of problems to date.
Don't mix them, your inviting trouble