if you put a oil base floor sealer over water base you will find the top coat will flake and peal off your new floor. You need to wait 30 days before applying the oil base sealer to reduce your chances of peeling.
I do no maby not because of the texture why cant you just try it out
Yes, you can. My favorite is Kilz Max, it works on everything and gives a great coat.
I can not do that
Yes, you can.
Yes, you can .
Only if the urethane paint is not waterbased... Urethane Paint cannot be mixed with anything except other Urethane products. Urethane Paints do not work on the same principals as "oil based" paints. Oil Based Paints rely on evaporation to dry. Urethane cures. by chemical reaction.
Look at label on can if urethane is oil based it should be fine. Think of it like basic chemistry. Oil and water dont mix, xlene based products are used to strip oil, so if ur using a xlene base over oil thats a no brainer. The urethane I use is a xlene base so I wld never use over oil. Im just not sure if they sell a oilbased urethane so check the labels
Why would you?
Assuming you're talking about wood finishing, spar urethane can be used over a water sealer. In fact, the combination is better than just a sealant or just the spar urethane. A very durable finish for outdoor wood products is soaking the unfinished wood with boiled linseed oil, letting the linseed oil cure, removing excess cured linseed oil, then applying spar urethane.
yes
Only if the urethane paint is not waterbased... Urethane Paint cannot be mixed with anything except other Urethane products. Urethane Paints do not work on the same principals as "oil based" paints. Oil Based Paints rely on evaporation to dry. Urethane cures. by chemical reaction.
Look at label on can if urethane is oil based it should be fine. Think of it like basic chemistry. Oil and water dont mix, xlene based products are used to strip oil, so if ur using a xlene base over oil thats a no brainer. The urethane I use is a xlene base so I wld never use over oil. Im just not sure if they sell a oilbased urethane so check the labels
Why would you?
Assuming you're talking about wood finishing, spar urethane can be used over a water sealer. In fact, the combination is better than just a sealant or just the spar urethane. A very durable finish for outdoor wood products is soaking the unfinished wood with boiled linseed oil, letting the linseed oil cure, removing excess cured linseed oil, then applying spar urethane.
urethane comes from oil
yes
can i use water base paint over oil base paint
Yes. Clean and degloss the oil based paint, apply an oil based primer, then apply the water based paint.
yes
It will protect the paint as long as you use a water based varnish, never use oil based varnish over water based paint. Tip: "water based enamel= water based finish". "oil based enamel= oil based finish".
Yes. Clean and degloss the oil based paint, apply an oil based primer, then apply the water based paint.
You can apply "oil" based polyurethane over "oil" based enamel, you can also apply "water" based polyurethane over "water" based enamel, never mix the two, there's to much of a chance for problems.