Want this question answered?
How do you reset 2008 honda element service light?
take a hammer to the light
The light will reset itself if the system is working properly and the tires are at the correct pressure. If the pressure is correct and the light is still on, you need to take it in for service.
Hi I have cruiser 2008 gxr how is reset t.belt light
how do you reset check engine light in 2008 buick lucerne
Resetting a service engine light on a 2008 Volkswagen r32 requires a diagnostic tool to be done properly. Another way requires disconnecting the battery for 5 seconds or more.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
I used this procedure to reset my 2002 s40 services light (it should work for 2008 s40 also). a) insert ignition key and turn it to the 1st click - no lights on bottom of the instrument panel should be light up b) press and hold trip odometer reset button, and turn the ignition key to the 2nd click - the row of lights at the bottom of the instrument panel should come on c) after about 5 secs the lights should go off except the Service reset light - it will blink d) when the Service reset light has blinked for about 3 times - release the odometer reset button e) the Service reset is complete Note: This procedure cannot be used to reset Check Engine light - it requires an OBD2 code reader.
Resetting an 2008 Audi A3 TDI service light can be done two ways. One by addressing the problem and the other way is to unhook the battery cables for up to a minute.
To remove "insp" service reminder message on Vauxhall Agila May 2008 onwards; 1. With ignition off press and hold both clock and trip reset buttons. 2. Turn ignition on (Keep both buttons pressed) (No need to start the car) 3.Wait for "insp" message to flash three times and change to three dashes 4. release both buttons and turn off ignition 5. Job Done ! Now just turn ignition on again to make sure it worked Hope this is of use worked first time for me.
if your take it to a autozone tell them you have a check engine light and they will tell you whats wrong if anything and reset it take it to autozone and tell them your check engine light is on and they should reset it
See Hyundai Technical Service Bulletin #08-FL-007 dated July 2008.