Yes. You will be needing a signal splitter to attach your satellite receiver to your television sets.
You can hook up a stereo system with a Dish satellite to an old TV with only one AC input by using the three plug RCA cable for the sound system. Then, use the AC input for the satellite itself.
It transmittes from a satellite far away to your satellite. It is like sound waves travelling throughout the world except it is the satellite transmitting waves to your satellite. The satellite is connected to a wire that leads from a satellite. That is how you watch you favourite TV shows!
Depending on if you have Dish Network Satellite or another provider, visit their website they will have instructions on how to hook up your receiver. Generally, their is a satellite input (coming from the satellite dish) and an output for your TV.
The short answer is yes and no. Yes you can if you are not passing HD satellite. All you need is 2 "diplexer(s)" (looks like a splitter, but isn't). at one end connect the satellite and cable. run the line to your tv, and split back to your satellite and cable. The Diplexer is labelled "tv" and "satellite".
Yes, there are two TV's and two input devices, so this is two separate systems
depending on the tv you could use different a/v inputs. if it is basic cable it can be connected to antenna input on the satellite receiver will work as if connected strat to the TV. if it is a digital cable box the first is only option.
this is not possible with direct tv in an obvious reasons. however, you can do this with dish network. before you connect your vcr to record satellite tv program, check first if your VCR has an HDMI input. if you found an HDMI input slot, then you are good to go. connect your satellite receiver to the HDMI input slot of your vcr then attach the AV cables from your VCR to your television.
If you have "snow" or a fuzzy picture on your TV and you have satellite TV or cable with a satellite receiver box or cable box, you may have your TV tuned to the wrong channel. Televisions need to be "tuned" to a channel or sometimes input (i.e. HDMI, etc) in order for you to view your programming with satellite or cable receivers. Contact your pay television provider, they can talk you through it over the phone.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
I'm guessing that you want to know why a TV needs more than one HDMI input. You could have one HD input from your cable or satellite provider, and then you might have another HD input from your DVD or BlueRay player.
If you have cable TV or satellite TV, make sure the cord from the cable or satellite box is connected and turned on and the cords are not loose. Also check the connection from the box to the television. You may also need to have your television on the correct channel or input in order to view programming.
You can use RCA cables or coax. You will see on the back of your Dish receiver a TV out for either coax or the RCA cables out, then plug the cable into the input of your TV. Be sure to tune your TV to whatever input you choose to view dish satellite programming.