Yes
yes because you can swap a h23 transmission onto an h22 engine
of course you can!
no
Not without swapping the transmission, computer, wiring, plumbing, etc.
This question makes no sense. Are you asking about an engine swap? Transmission swap?
Only if you also swap out the transmission because of the gear ratio in a v6 tranny is lower causing your engine to rev high
It is possible to swap the engines, and the V6 gives a noticeable improvement over power and acceleration. Just make sure the transmission can handle the V6 or swap the transmission as necessary.
If the engine swap is for the same type of engine then it is just a matter of removal then install of the new engine. If swapping for a different type of engine then the motor mounts, transmission, and space requirements as well as wiring may all have to be modified.
Not without a LOT of customization.
H-series engine mated with a B-series transmission using an adaptor plate.
If you are swapping the Vulcan OHV engine, it will work without issue. If you are attempting to swap the Duratec DOHC engine, it will bolt in, but the computer will not be capable of running the engine.
Yes, with custom fabrication. You have to swap the transmission, computer, engine, etc.