yes you can swap rear ends from late model to early model and visa versa... as long as the gear ratios are the same. the rear ends in my 1996 full size and my 1986 full size are exactly the same except for a 3.08 ratio and a 3.42 gear ratio...
No. The spring perches are in different locations between the OOBS ('73-'87) and the OBS ('88-'98) trucks.
how do you adjust rear brakes on a 1986 chevy silverado?
how to replace the rear seals on a 1991 Chevy S-10 pick-up truck
If they are both 10 bolt, which means that 10 bolts holding on the rear end cover, and have 8.5" diameter ring gear.
No , a 1986 Chevy Caprice is REAR wheel drive
the fuel filter is located on driverside rear in front of the rear wheel.
it's located in the rear of the transfer case
overhauling a cylinder is a job for a pro, and not recommended...replace it with a new one..
The "wing" that is over the rear hatch is to help keep the rear window clean.
Lower rear end of the engine
Please clarify your question as in front or rear axle.
If you have the "know how" you can.........to answer your question, yes, it can be done
open it up and back into a tree this worked for me
350 or 305 depending on rear end
1986 and older are 2 piece.
No, a 2001 Chevrolet S-10 rear end will not work on a 1991 Chevrolet S-10.
The rear speakers are 6"x9"
It is a front wheel drive.
Yep, they have one. 1986 and older has a two piece rear main seal. 1987 and up has a one piece rear main seal.
The length of the 1991 Chevy 1500 transmission is 37 inches. The bell housing will account for approximately 5.5 inches.
Front disc/rear drum
lower rear passenger side of engine
no way, car rear ends are alot smaller then truck rear ends. it will not work.
Look it uo on youtube