Only with the rear driveshaft removed.
2002 Jeep Liberty 2WD Standard can be towed in neutral. 2002 Jeep Liberty 2WD Automatic cannot be towed. 2002 Jeep Liberty 4WD Standard & Automatic can be towed by placing transfer case in neutral and removing a fuse from the fuse block (ignition fuse). The 2WD Automatic must have the driveshaft disconnected or you must use a tow dolly or car trailer.
You will need to remove the drive shaft to tow a Jeep with a tow dolly.
You have to remove the driveshaft to tow with a dolly.
You can if you remove the rear drive shaft.
you need to have a towbar and a Jeep Liberty
You have to remove the driveshaft to flat tow a 2wd Jeep.You have to remove the driveshaft to flat tow a 2wd Jeep.
There should be slots in the frame rails
The liberty is capable to towing up to 5,000lbs when properly equipped
Yes it can be towed, either flat towed or on a dolly with the rear wheels on the ground. The 4wd Liberty has one of two transfer cases, an NP231 or an NP242, both having a neutral position that isolates the spinning wheels from the engine and transmission. If you want to flat tow, then you will need special rigging on the front of your Jeep.
The 2012 with a 3.7L has a rating of 5000 pounds.
form_title= Car Tow Dolly form_header= Moving is easy with a car tow dolly. When do you need the dolly?*= _ [50] What is the make and model of the vehicle?*= _ [50] How long will you need the dolly?*= _ [50]
Yes.