I used it on the ruptured seam of a motorbike petrol tank a few years and its still holding. I dare say it'd work just as well if both surfaces are cleaned first.
I used it to stop a leak in the transfer case to drive shaft on a 92 Eagle Talon.
use leak stop or something. Where is your oil leak?
You can use an oil stop-leak product to stop an oil leak on your 2002 Peugeot 206 1.4.
Yes, it can be harmful. Use no oil treatment or stop leak at all.
I wouldn't recommend it. Replace the gasket.
If you have an engine oil leak on your 2002 Peugeot 206 1.4, you can use an oil stop-leak product to fix it.
use duct tape!
You install "stop leak" in the radiator per the MFG directions.Dont use barsleak use a chemical called therma weld it work perfect for me its about 300$ and worth it!!!!
Dont use barsleak use a chemical called therma weld it work perfect for me its about 300$ and worth it!!!!
weld up planet gears more you weld the better just to stop them from turning,dont recommend for road use though!!!
I had a 95 3.8L that leaked and stop leak worked for a little while. The problem is as it gets worse it can leak antifreeze internally into the oil. This is at best a short term fix. If you use it keep a close eye on your oil level, if it starts rising or becomes milky the gasket will need to be replaced immediately. MGL
10 W-40 motor oil can be used in your Subaru, with a minor oil leak. The heavier oil will not hurt your engine and may slow down the leak.
You dont. -Mechanic