Want this question answered?
2/0 AWG in copper and 4/0 AWG in Aluminum or copper clad aluminum.
If it's a heavy gauge (around 8 AWG IIRC), that's the charge wire to the alternator BATT post. The larger cable (about 4 AWG) goes to the starter.
A 100 amp service requires that you use AWG 4 copper wire or AWG 2 aluminum wire.
Yes you can. You did not say how many amps were required.
4 Gauge wire is larger in diameter than 6 Gauge wire.
No, code does not allow that.
AWG # 6 copper or AWG # 4 aluminum
Yes, 50 ft is ok provided you are using the correct AWG. You can do the following lengths for 30 Amps with a 7000 watt load - AWG - 4 = 300 ft AWG - 6 = 175 ft AWG - 8 = 100 ft AWG - 10 = 75 ft
4 AWG copper or 2 AWG aluminum.
AWG 4 copper.
Primary : 4 Secondary : 3/0 <<>> To answer this question correctly a voltage must be stated.
Using the AWG for wire sizes only goes up to 4/0. After that the increases use MCM to size the wire. So your 262 MCM wire size will be same in AWG. There is no 262 MCM in the North American market place. It goes in 50 MCM increments starting at 250 MCM , 300 MCM, 350 MCM, 400 MCM right up to 2000 MCM cable.