If you are positive that it is asphalt I would not suggest adhering tile directly to the asphalt. If removal of asphalt is not an option I would install a subfloor and use thinset mortar to adhere the tile. Another option (probably the better option) would be to pour a concrete mix over the asphalt. Than use thinset to install the tile. The concrete will incapsolate the asphalt. Asphalt more than likely has oils in it and can be a hazard.
Use petrol or paint tinner...
That would depend on whether they are ceramic tiles or more vinyl tiles.
The answer is, it depends. Different types of bituminous cement concrete (asphalt hot mix) use different percentages of asphalt cement. In Virginia, base mixes use at least 4.4% asphalt, while surface mixes are up to about 6%. Liquid asphalt is a little heavier than water; it weighs about 9.4#/gallon (depending on the source and grade). Here's the math: Base mix 2000#/ton x 4.4%/9.4#/gal. = 9.36 gal/ton surface mix 2000#/ton x 6%/9.4#/gal. = 12.76 gal/ton hope this answers the question.
Yes, but you should you use an adhesive that is ductile
Not JUST a grout no. You can get a cement that will also work as a grout but a pure grout would not have the adhesion required to stick the tiles to the wall properly, you should not use it as a cement.
Use petrol or paint tinner...
Yes, if the adhesive is smooth, no lumps and if you use a compatible glue, not thinset cement
You couldn't tile directly over a plywood sub-floor because over time, the wood will be expanding. There are products you can use in between the plywood and tiles to keep them in place such as cement backer board.
I have a tile floor in my kitchen.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
That would depend on whether they are ceramic tiles or more vinyl tiles.
Thinset tile cement.
in asphalt and cement concrete. We can use sand ,cement and water as a mixture of mortar.
Yes, you can use floor tile on the wall. It can be heavy, but if you use a high quality latex fortified thin set (NOT mastic) you should have no issues. It also should be put onto cement board for best results. In the past using floor tile on the wall was an issue because trimpieces were not easily available. With trends changing, you are seeing more with bullnose and you can always use ceramic trim like schulter. Now, you CANNOT put wall tile on the floor. They are often made with white clay and other more bridle ingredient's. Check the box, it will tell you what it is rated for.
Can I use water & vinegar to clean porcelain plank floor tile
cement board
No