0
Can you weld the crankshaft pulley onto the crankshaft of a 1995 Honda civic The bolt came loose and broke the 'key' and stripped all the teeth off the pulley and end of crankshaft1.5L?
Wiki User
∙ 15y ago
why not get a new motor why not get a new motor ANSWER by welding on the crankshaft while it is still assembled to the engine will most likely melt your seals thus causing you to replace the seals.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What tools do you need to remove the crankshaft pulley pn 1995 Honda Passport?
What tools do you need to remove the crankshaft pulley on a 1995 Honda Passport?
How do you break loose the crankshaft pulley bolt on an 1996 Honda Accord?
You don't
Which direction does a crankshaft pulley bolt come of on a 95 Honda accord?
crankshaft pulley bolt is left hand thread,so it will come out opposite direction to normal bolts
Which way to turn the crankshaft bolt on a 97 Honda civic?
The crankshaft spins counter-clockwise on a 1997 Honda. To remove the bolt for the main pulley spin the bolt clockwise.
Part number for acura Honda crankshaft pulley tool?
Try using harmonic puller
Where to find crankshaft pulley bolt for 1.5 DX Honda Civic?
At a Honda dealer for $10. If one is not within driving distance, then go to Honda.com.
How do you break loose the crankshaft pulley bolt on a 1997 Honda Accord?
Impact wrench. It's the ONLY thing that works.
Do you turn counter-clockwise to loosen the crankshaft pulley bolt on Honda Civic EX '95?
Two Words------IMPACT WRENCH
How do you remove the crankshaft pulley on a 1998 Toyota tacoma with the 2.7 engine?
how to replace the rear bearings on a 1999 Honda fourtrax ATV
What is the torque settings for crankshaft pulley on a Honda Accord 2.3L engine?
which direction does a crank shaft pully bolt screw out on a 2002 honda accord lx 2.3l eng. clockwise or counterclockwise?
Where is the csf sensor located on a 1998 Honda Civic LX?
its behind the crank pulley on that gear at the end of the crankshaft on the timing belt side of the motor
How do you remove crankshaft pulley bolt from Honda CRX d15b2?
Your will have to loosen up the alternator, and take off the alternator belt from around the crankshaft pulley. To get the crankshaft pulley bolt off, you will have to use in impact wrench on it. Should be on the driver side of the car. Also it is a regular threaded bolt. The torque on it from the factory is around 115lb/ft. You will need a 17mm Impact socket and a good impact wrench. It will not break loose easily if there is rust on it like most that are 20 years old. Even with penetrating oil it will not be an easy job. Use care when working with the crankshaft pulley as it is old and will crack easily as well.
