Changing brakes is a simple task. Lift the car, remove the wheel, remove the brake shoe, replace the pad, replace the shoe, replace the wheel and lower the car.
I have one. Want it?
== ==
There is NOT an EGR valve on this engine.
How do you replace an 1994 3.1 Oldsmobile Achieva s radiator?
4x6 in the front 6x9 in the back
If you need to know that. You should not be behind the wheel.
Under the dash on the left side of the steering column/
to the left of the right rear tire It'son the front of the gas tank.
On my 93 it is under the kick panel under the dash on the passenger side. Fairly easy to get to.
Pull the tires off and take the brake calipers off and the rotors will pull off.
It really is not hard if it is the same as a 1994! I've had to change mine twice! All you do is unscrew the brake lines from the Master Cylinder, unplug the two sets of wires that are underneath the lines. Then unbolt the two bolts that are under the brake fluid reservoir. The unit should lift right up and off! Easy as 1-2-3!!
There is no brake light relay. There is however a brake light switch located above the brake pedal.