No , the 454 cubic inch V8 is a Chevrolet / GM engine
A 1997 Chevrolet 454 cubic inch engine diagram can be found at most Chevrolet dealerships. The engine diagram can be obtained from most auto-parts stores.
454 engine torque is 752 pounds of torque
divide 454 by 61 and you get 7.4 liter
An Allison 1000 transmission will not bolt up to a Chevrolet 454 you begin engine. The Allison transmission is much larger than the Chevrolet engine housing can handle.
Yes, that was an optional engine.
The horsepower of a 1991 Chevrolet 454 cubic inch engine ranges between 240 horsepower and 350 horsepower the engine torque ranges between 700 pounds and 850 pounds.
Yes. You'll need to change the exhaust and cooling systems.
That would be the 350 or the 454
You can find a 1986 Winnebago, with the Chevrolet 454 cubic engine, vacuum routing diagram at most Chevrolet dealerships. The vacuum routing diagram can also be found in most Chevrolet engine service manuals.
454 is total volume in cubic inches for all cylinders together. Chevy = Chevrolet. The brand.
A 454 Chevrolet engine which is experiencing a choke light while the choke is physically open, indicates the choke is not receiving power. This can be caused by a loose connection or a defective choke.
We need to know size engine you have.
Yes, it will work. If the 454 was a tall deck design, you'd need to shim the distributor up .400" to mate with the 350 oil pump shaft.
Chevrolet Firing Order 18436572
The 1979 454 CI engine from Chevrolet features 245 horsepower as well as 4000 rpms. This figure only covers the V8 version of this engine.
take off the engine cover or go to the drivers side wheel. it is mounted behind a sheetmetal fence looking from the wheel , and if you are looking from the top of the engine it is on the left of the exhaust manifold.
They had the 350 small block and 454 big block in them.
10w30 in the winter time---- 20w50 in the summer time.
The timing on a Chevrolet 454 cubic inch engine is either 4 or 6 degrees before top dead center. Minor variations will produce different performance results.
Yes, it will fit. By fit, I mean fit in the engine bay. You will have to make modifications.