It shouldnt. The cruise control senses by the switch on the pedal not by the lights.
Are you sure you need the fuse for the cruise control. My cruise control wasn't working, neither were my brake lights. All 7 bulbs were burnt out. When the brake lights were replaced the cruise control worked.
Check your tail lights. If they are stuck on the switch might be bad. The brake switch will cancel the cruise. If a light has a ground fault the voltage will feed back and cancel the cruise. Those are a couple places to start looking. If that's not it, it's probably a little more severe.
The cruise system shares fuses with the engine and brake lights. If the car runs and the brake lights work, it is not a fuse.
the crusie control band is probly broken
I had this same problem with my 2003 Venture. The Cheverolet dealership told me that the cruise contol is directly linked to the brake lights. The simplest and cheapest place to start would be to check your brake lights...if they are not working, you will not have cruise control.
No cruise control or fender mounted brake lights on a 2002 Tahoe could mean a short in the wiring or the ground wire has failed. No cruise control is also a result of a bad oxygen sensor. Most GM made vehicles have two oxygen sensors.
The cruise control may not work is there is a problem with the brakes. Check to ensure that the cruise lights come on in the dash. Also, check all the vacuum lines to see if there is any issue.
One for brake lights, one for cruise control. If you hit the brakes when using cruise control, that second switch is what tells the control modules that the brake is being depressed.
The cruise control is fed by the engine computer through the brake light switch. It does not have a separate fuse.If the engine runs and the brake lights work, it is not a fuse.
The cruise system shares fuses with the engine and brake lights. If those work, it is not a fuse.
It is important to know the meaning of flashing lights in a car. When the cruise control set light flashes, it either means the driver hasn't finish setting the control, or that there is an issue with the fuse or wiring.
There are several dash lights on a Mitsubishi Triton. There is a light to indicate a hot engine, low battery current, high beam lights and when the cruise control is engaged.