what is the best way to bleed brakes when installing new caliper on front left wheel
Power assisted disc brakes.
Yes. I own a 2000 Chevy Blazer.
Does this Blazer have four wheel disc Brakes? NEW ANSWER: There's no reason to bleed brakes if you did not open the system.( where brake fluid came out )
NO. I had a 96 and it had drum brakes. I believe the rear disk brakes started in 1998 for the Blazers.
If it is just that rim,your brakes could be dragging.Inspect,or have them inspected by a Chevrolet dealer or an ASE certified mechanic.
Yes it did.
I have a 2003 s-10 blazer and the auto stores only show rear disc brakes, mine have drums, why is that
Test brakes lightly after driving through deep water.Brakes may pull to one side or may not hold at all.Dry brakes by driving slowly in low gear and applying brakes.
The front brakes are disc brakes and are self adjusting. The rears are drum brakes and are also self adjusting providing the self adjusting mechanism is in working order.
the pistons inside your calipers are sticking
Yes, that will work.
If you only did the front brakes, the problem may be in the rear brakes.
Remove the calipers and the disk will pull right off
Bad brake booster.
An 03 would have them all around.
Vacume problem or problem with booster/insufficient fluid, leak check those things.
If your brakes are locking up it is because the ABS is not working.
Its got disc brakes in the front, therefor brake pads and its got drum brakes in the back, therefor brake shoes
While driving, apply the brakes gently for a short distance, as you maintain your speed.