Yes. I have that year van and it has a center brake light over the back two doors...
how to change third or center brake light on Chevy beretta 95
Check bulbs?
It does not have a sensor, It has a switch and it is mounted just above the brake pedal.
Stop light. Third brake light, or center high mounted stop light (CHMSL).
A defective or stuck brake light switch. There are basically 2 types of brake light switches. A mechanical switch, mounted on the brake lever and a pressure switch, mounted somewhere on the master cylinder.
what do you have to do to change the center brake light
If the light is in the center of what looks to be a tire with tread then it is the low tire pressure warning light. If the light is in the center of a symbol that looks like this (o) then that is the brake light warning. It can mean your parking brake is on or there is a problem with the brake system. Check the level of the brake fluid in the master cylinder resivoir.
The center brake light replacement will require replacing the entire brake light assembly. Remove the wiring harness. Remove the center brake light retaining screws. Reverse the process to install the new center brake light.
Blown bulb/ bad bulb
Check the brake light switch. It should be mounted on the upper part of the brake pedal or the brake pedal frame. If the brake lights go off when you unplug it you have a stuck or shorted switch.
fuse, bad turn siginal switch, bad bulbs, bad bulb socket, bad brake light switch mounted under the dash at the brake peddle.
Assumingly you're referring to the Center High Mounted Stop Lamp