Refer to the RPO codes listed in the glovebox. RPO GT4 is 3.73 and RPO GT5 is 4.10
Depends on each individual truck. Look in your glovebox....there is a label from the factory with parts codes on it. The one with G refers to your gear ratio/ ring & pinion. GQ1 -- AXLE REAR, STD RATIO GT4 -- AXLE REAR, 3.73 RATIO GT5 -- AXLE REAR, 4.10 RATIO GU4 -- AXLE REAR, 3.08 RATIO GU5 -- AXLE REAR, 3.23 RATIO GU6 -- AXLE REAR, 3.42 RATIO G80 -- AXLE REAR, LIMITED SLIP (POSITRACTION)
These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92 These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92
No it can't be since the car has already been placed for what it is.
what is rear end axle ratio
Check the SPID in your glove box. one of the G** Codes will be the rearend ratio G80 means you have a locking(posi) Rearend. GU2 AXLE REAR , 2.73 RATIO GU4 AXLE REAR , 3.08 RATIO GU5 AXLE REAR , 3.23 RATIO GU6 AXLE REAR , 3.42 RATIO GU7 AXLE REAR , 2.77 RATIO GU8 AXLE REAR , 3.90 RATIO GT2 AXLE REAR , 4.77 RATIO GT3 AXLE REAR , 4.55 RATIO GT4 AXLE REAR , 3.73 RATIO GT5 AXLE REAR , 4.10 RATIO Anything else, let me know, I'll look it up. (cortex454 at gmail dot com
The Chevrolet suburban 1500 axle is interchangeable with the Chevrolet Silverado 1500 axle. The manufacture year of the vehicles should be the same.
I believe the axle code is listed on a sticker on the end of the drivers door The axle code will correspond to an axle ratio Once a person knows the axle code , the ratio can be looked up
Axle code? there are usually labels or tags on the axle with ratio and part numbers on them.Axle code? there are usually labels or tags on the axle with ratio and part numbers on them.
the lower your rear axle ratio, the worse your mileage.
axle ratio cade for ford super duty”
For a 2001 F150, you can check the axle codes on your door sticker. The axle code to rear axle ratio values are as follows: 17 for 3.31 open differential, 19 for 3.55 open differential, H6 for 3.73 limited slip, H7 for 3.31 limited slip, and H9 for 3.55 limited slip.
The rear wheels are bolted to the axles. The axles run through the inside of the rear end housing.